Search results

My trailer brakes locked up when I attempted to tow my m105a2 with the dual hoses hooked up to my m923. I had the hoses hooked up straight Left driver side to Service and right side to passenger emergency on the m923. I did have the valves open as I tested for air and had changed the glad hand...

I am working on a m923 rear axle changing the pinion seal on the front of the axle and the gasket on the front bearing cover due to a small drip leak. I have loosened the drive shaft and moved it out of the way, Pulled the cotter pin and big nut. (BTW, It is 2 1/4). I also have the 10 bolt...

I would like to thank Chris for this wonderful forum and the information that is readily available here. Hats off to the tech gurus and mods for making it happen also. Many members here have been very helpful to me and I appreciate all the support and info and the warm cooperative atmosphere on...

What is the socket size I will need to remove a gynormous castle nut off a 5 ton military pintle hook? Biggest socket I had is 2inch and it is bigger than that....aua.....aua

Many thanks to David AKA ThunderCracker for being on standby at Redstone to help my 18 year old son recover a M105 trailer. Everything went smooth and David was not needed!:D Great Piece of mind even though not my son's first rodeo; Dad sent him on a mission to pick up a trailer for me when...

Does anyone know the tm for repair or parts for a M945 bridge truck? Not looking for tm5-210 military floating bridge equipment but specifically for the m945 truck. Thanks, Juan

I have 2 light switches off a m936 parts wrecker that are on/off switches for the convoy light beacons and for the floodlights. I am trying to wire them up to use. The back rubber housing has 4 wiring connectors. They have no numbers or markings except 2 have ribbed lines and 2 are smooth. See...

When I used to sell parts, brake Tubing was only black. I now see green,red,blue & black. What is the difference and what color is used for what application? What is industry/HD repair best practices? Thanks, Juan

Many thanks to CSMDavis for allowing me to visit his LZ and pull some parts! He definitely has some cool toys, BTW. If you need M939 parts, He is the man to call! :) Jeff, Thanks for your hospitality! :beer:

I have unexpired premium membership but it does not have the attachment options in the bottom when I tried to post a classified ad. I could not do it either on a quick or advanced reply. What am I doing wrong? Thanks for any help?

I understand some mv have an optional 24v power socket for auxiliary equipment in the cab like the mre pouch heater bag or ___ to plug into ?. Can someone snap a picture of the socket & bracket so I can see what it looks like? Is it one wire, grounding on bracket or two wire hook up. Amps...

Many thanks to kevinscott88 with hooking me up with an antenna cap for my as3900 base and shipping it to me n/c. Awesome and thanks for your help! Juan

My 923 had a small drip on the Transmission spin on oil filter on the passenger side of the engine compartment. To my surprise it spun off by hand and was not tight. Maybe engine vibration or off roading has loosened it up. :cookoo: I don't want to think of the what if it spun off causing a...

Many thanks for helping me out with a gasket and a freebie at that! :) Have a blessed day! Thank You! Juan

I purchased one used LED taillight by trucklite that is allegedly working. The old composite light had 4 wires. The new one has 5. I connected all 4 wires and no lights, the 5 th wire was marked ground with no number so I grounded it and no lights. No marker, tail, turn- nothing.aua I do have...

I have a m923 with the NHC 250 and I have not been able to locate on the tm's what this plastic bottle is for? I am not sure what i am looking for? It is next to the primer pump with a removable screw cap? It is about a quart size with a small fitting on the top. Thanks for the help! Juan

Local GL contact info if it will help anyone: Chester Bruington 210-221-4340 602-350-6786 They are in bldg 4195.

I would like to use my truck with the cargo cover tarp rolled up on the sides. I see the outside has loops and straps on the inside to roll it up. How do I use the straps on the bows to secure the cover to keep it from coming off since the super rope won't be holding it on the bed side hooks...

Thank You Sir for your gracious offer to give away antennas for just the cost of shipping and a donation to a good cause!!!!!!!!! I appreciate your great offer and customer service. Have a blessed day! Juan:)

Hi, I am looking for the nsn number for the antenna bracket that goes on the front fender of a 5 ton m939 series that the sugar scoop bolts to? Also looking to buy if you have one? I appreciate your help! Juan