Search results

I "suspect" they are selling china.com......on some stuff... Was there tags or stickers on box with source of manufacture?

Make sure you get one of the pictured silver trailers not the older orange ones. As stated, you are towing a Jeep CJ5 as their database will not accept Hummer H1. In most states including La, the towing vehicle's policy covers the trailer. Check your policy particulars and YMMV.

Yes, You need the longer one -2. The shorter one is usually front.

I was in the same boat but did not want to go back with the OE fabric as I feel it is thin and not the best long term solution. I am real happy with the seat covers I got from BMI on epay. The Molle panel on the back to hang stuff is a real plus. They are a defense contractor. A little higher...

Tractor supply grade 8 coarse thread by the LB is a great deal if one close to you. Just a thought if you are at it. Consider getting the mud flap kit and bumper reinforcement plate and do it all at the same time. You will need longer bolts for those holes. I have seen the mud flaps on Epay...

look on my thread post 34 https://www.steelsoldiers.com/threads/juans-m998-hmmwv.157259/page-2

This thread went from A-Z and other posts were deleted ......

Water pump can fail internally....

Greetings, After 4 weeks of ongoing contacts, ( has been much more challenging this time) I have been able to secure permission for Steel Soldiers to exhibit/participate at the Naval Air Station Joint Reserve Base New Orleans 2022 Airshow on March 19-20. If you watched NCIS- New Orleans- it was...

Just noticed this post. you lose alot of its effectiveness being behind glass. The instructions for the solargizer also discourage mounting behind glass. On most hmmwv's they are on front of the hood

M105A2 and as noted probably $750-$1000 maybe a few hundred more with a good tarp cover.

Any ac guy can make longer hoses and some parts stores like NAPA & hydraulic hose shops can also make crimp on hose assemblies. Field barb fittings that just use clamps are also an option for the diy.

Otc is heavy duty truck repair tools Ken tool is another supplier of spindle nut HD sockets.

Some flavor of mrap

First listing looks like dry -no acid Was not aware napa had dumped excide

There is an ebay seller in New Orleans who is also an infrequent poster here, who had one listed with out the hydraulic pump reasonable if you have a hydraulic unt for maybe a porta power or something else that can operate it?

the turbos have extension brackets to the dash and a raised ledge bracket for the feet. On the basic models without ac the duct on the dash has 2 well/nuts that are threaded 1/4 for the bolts. Not sure on a/c models but I suspect there are 2 rivet nuts on the dash to take the bolts.

Crazy world of uncle rules is that trays and antenna mounts need to be removed for demill but they are not restricted when sold removed from the trucks or nos surplus. Demill items removed has to be destroyed and verified destruction.

Yes that is a top tray with the long legs. Scarse because they have to be removed for demill and usually come off before vehichle turned in at unit as they keep the tray and mounts etc with the radios. Also everyone wants a top tray now as none come with gp units. I had a bunch of top and...

Yes. Way to tell is the short legs and the top ears are bent in a L to bolt underneath. There are different ones that basically have the pre drilled holes in different locations depending on what radio or gizmo goes on it and the cable pass through hole in different configurations. You have...