Search results

I've had many 3-axle MV trucks over the years, and the fallout is my old '67 M54A1 is the one I kept. A few salient points about the G742 vs G744 5ton: >Power steering is stock. >10-bolt Budd wheels, easier to source tires too. >Smallish Spicer 3053 vs a far more robust transmission. >If...

That tool has saved me a lot of hard work on MV's. :)

Electrons are wiley lil' critters...

The "Angry 19" needed that 100A system, as it was a 100 Watt AM transmitter. The possibility exists that a pair of 19's were used in a mobile repeater setup, one bolted to each L&R troop seat.

The AN/GRC19 comes to mind. If more than that was necessary, a shelter would be expected: https://www.liberatedmanuals.com/TM-10-5411-205-23P.pdf

I have NOS 100-A system parts.

The PTO clearance is adjusted with a gasket stack. One starts with a thin one, and run up a couple of the mounting nuts gently to check if it easy to turn the output shaft by hand with it in gear. It probably won't be, so dismount it and add another gasket. Keep at it until you can easily...

The most critical part is getting the proper gear mesh on the PTO. The hardest part is getting the bumper to line up with the extensions. A spud wrench really helps.

A simple safety system is to retrofit some Murphy gauges. In my opinion, genset monitoring has fallen victim to overthinking. They are purely mechanical indicators and switches, and when properly installed will watch over your genset with high reliability...

If it overheats or loses oil pressure, it's failure is on you.

Cut the old lug off, far enough back to not have green copper (acid damage). If you still have enuf slack, strip the insulation off and crimp on a new lug. If no, get ready by reading the next paragraph. If you can't find a proper lug or don't have powerful crimpers, take it to a welding...

I have some G744 diesel tanks in pretty good shape, 70 & 50 gallon size. Free for shipping, or come and get it.

Having driven my M543 gasser (yes, the bed was swapped by the local guard unit) some 200 miles from Yuma to Chandler, AZ was an experience indeed. It was Summer, so I drove it at night to stay as cool as possible, and the blue flame from the tailpipe was just divine. That R6602 had plenty of...

I started the old girl up and let it idle a bit just because. She likes her love.

Or a "steel" and a half....lol

Done many over the years with a punch & hammer. I use an old race as a drift. It's not rocket science.

Does Ca have a historic vehicle licensing program? AZ does, completely non-commercial no restrictions other than carrying really heavy loads. Has to be 25 years old or more. DG

Make sure and use the special inverted-flare wrenches when tightening those. A regular open-end will distort the nut when getting them really tight. DG

Please snap pix of the engine and cab for me. I can't find that driveshaft, but certain I'll have something you can use. DG

Something a bit hard to wrap your head around is the difference between the source impedance of the grid and a genset. Impedance is a term describing the resistance portion of an AC circuit. Remember, any type of resistance in a circuit will lower the amount of energy. The lower the...