Search results

I used thin self-adhesive insulating foam weather stripping for my rear door seal. Home Depot, maybe $6...

Hah. /offtopic I had a car come in, 'intermittent equipment failure'.... Took it on a test drive, hit a bump *click* circuit breaker kicked..... pulled over.. reset it... worked great... *bump* ... *click*.... head back to shop.. Traced all wires to center console, all neat and tidy from the...

I was an installer/upfitter, building cop cars, fire trucks, ambulances, etc. and yes, even did a stint installing car alarms and stereos. When you had to tap VSS wires, run lines throughout the vehicle, make it idiot proof and **** near invisible, doing a stereo or an alarm is child's play. I...

APRS. APRS trackers can switch relays via an APRS message, like the OpenTracker2... Hook it to the fuel shutoff solenoid. You'll have location AND the ability to remotely shut it down.

Going to go look at an M1009 tomorrow. Owner thought he had a bad flexplate...so he took it to a transmission shop, they said they replaced it, now it doesn't run.... just grinds.. He doesn't wanna fight with the shop and apparently he doesn't wanna deal with the truck either. It's cheap...

Why can't I ever find a decent 1028a3? grr

Picked up an M1009. Been driving it and noticed shift points were off.... 35 and 50, super harsh. I know what that means.... So I pulled the air cleaner housing off and inspected the vacuum lines... They crumbled in my hand. Went to O'Reilly, spent 6$ on new vacuum tubing, and now...

Bypassed the adaptor and went straight to connectors. Hoses were rotted... all of them. Replaced them, about $6 at O'Reilly. Now it shifts around 25 and 35 and is so soft you almost can't feel it .. yay!

22506637 'adapter' Mine is falling apart and I'm sure the reason for my late shifts... Can this be removed and plumbed directly to the regulator?

Painted last month...Before/after with Behr 4300, primary green coat, then 3 color camo per tb 43-0209. Freehand, so not perfect.

Painted last month... Before/after with Behr 4300, primary green coat, then 3 color camo per tb 43-0209. Freehand, so not perfect.

Just getting pissed. My M1031 bench fits me fine. A little tight but completely usable. I get a 1009, and I feel like I'm in a jeep, with the steering wheel in my ***** and my head hitting the ceiling... what the **** is going on here? I pulled seats out of an S10 since they looked a little...

LOL. I thought the same...

Picked up an M1009 used by the USO... custom embroidered seats.... front and rear... any idea on their worth? I'd rather have regular seats... heh .

I installed a battery switch... heavy duty I also had these handles/lock protectors welded to the door/body, allowing me to use a beefy cylinder lock. https://www.lowes.com/pd/Fenix-Black-Gate-Handle/1000194269

Sold it... Waiting for the lowboy to get here..... again.... First one came and it was overheight because the broker lied to the trucker and told him it was 11'0" instead of 11'6"... Compound that with a deck height of 3'7" instead of 3'2" and letting the air out of the tires wasn't gonna get it...

and by putting your bed above the cab, you're seriously limiting the height... which will restrict quite a few... uhhh... nocturnal activities....

Glad I could be of help

I may ask an attorney friend of mine to write a strongly worded letter to them. Sounds like it may lubricate the gears.

I'm living in my M934... towing the M1031... but I can't exactly afford 5mpg either.. heh.