Search results

NAPA -LMP 623 NAPA AUTO PARTS

Or McMaster-Carr for the bulbs. McMaster-Carr 1505k389 or 9527t085 I jammed nuts on a bolt to make a doubled ended bolt, but a coupling nut would have been a better idea, wish this had come up before lunch, I would have added one to my McMaster Carr order this morning... McMaster-Carr

vehicle vs. equipment Ditto on a "power-plant" (M103 trailer with 2 MEP-003a on it). According to the GL rep I spoke to on the phone, their automated system won't deal with "equipment", only "vehicles". Equipment that includes a vehicle has to be manually processed. I e-mailed my form...

For a Deuce, I buy my electrical parts from Erik's Military Truck Parts M35A2 M35A3 M37 M813 M151 M923 M54 He has reasonable prices for reasonable quantities of correct wire and connectors. Also has the complete correct harnesses, usually (a lot of the cheap e-pay ones are for the oldest gas...

I just bought a set from one of the e-bay sellers, expensive, but they seem to be the correct parts. None of the usual suppliers had them as of a month or so ago. I looked around a lot for someone who had even just the plain rubber angles, and I finally found one extruder who had the right...

If you have the dimensions (there doesn't seem to be a US/English standard, and none of the parts numbers in the TM seem to directly cross to anything I can find), have you tried the racing suppliers ? www.pegasusautoracing.com Search Results for brake banjo bolts - SummitRacing.com banjo -...

Welcome !

Welcome to the madness !

Welcome !

If you want an online source, I've bought a fair number of fittings and hoses from these guys- DiscountHydraulicHose.com

This is the condenser I've bought, pretty sure it will fit above my winch, but haven't tried to mount it yet. I do know I'm going to have to move the hood safety latch. 14 X 25 Superflow R-134a Condenser - Painted Black Aluminum

Alternative A/C Compressor Belt Routing I thought the rule of thumb was 120 deg. of belt wrap, or 90 deg for very light loads. So the waterpump pulley is also short on wrap. I've considered 3 alternate possible belt arrangements. Anyone know if the paired belts are for redundancy or...

Some favorite hydraulic tutorial sites- Fluid Power Basics | Hydraulics and Pneumatics Hydraulic Tutorials Manufacturer's sites- Literature Library Hydraulic Cylinders Prince Manufacturing Corporation Galtech oleodinamica S.r.l. Parts houses - Surplus Center - Hydraulics, Engines, Electrical...

If you get a piece of pipe with one expanded bell end, the bell is also the right size for the seal.

US-285 is one hot fast road ! (at least from Carlsbad to I-10) Not where I'd want to drive a M35/109 in July. We did a meandering trip from Houston to San Diego 2 summers ago, and that was the hottest (115F) and just about loneliest (I-8 in Arizona was close) road we used. At 85-90 MPH I was...

I didn't take super exact measurements for a camping setup, but here is what I have - Inside dimensions of bed- 110" long x 74" wide x 60" high (bottom of tarp bows) steel sides are 18" high wheel wells in bed - 10" wide x 12" high x 41" long , 30" from rear inside of bed and 39" from front...

These guys have a m35a2 Lego model, and check out the custom minifig weapons ! M35A2 Gun Truck - Brickmania

Welcome to the site.

If you dig through the layers of paint on your stock wheels, you should find stamped part numbers and ratings. All that I have seen have been rated for 9.00 x 20 through 11.00 x 20 tires. The couple of old riveted wheels I have listed up to 12.00 x 20 tires (although I think you need spacers...

Try a search for a Dynamotor pe103a. Looks like it converts 6 or 12 VDC to a much higher AC voltage for a SCR-284A / BC-654 world war II to Korea era radio. This site had some info- Sherry's Boat Anchors (Note: I don't know anything about them, just like to search for weird stuff on the net...