Search results

I hate to ask this, but if you have a tire that’s 10 PSI lower than the rest and I work the system as you describe above, is it correct to assume the air will take the path of least resistance (to the low tire) and the system will equalize eventually?

I should’ve asked, what do you mean by “compressor unload?”

I’m going to attempt this next opportunity. Thanks for the thorough info.

Your comments about tank have me wondering…and it sucks that the TM doesn’t even mention it. I never tested it. I do know the pressure switch test in the TM showed it’s working. Am I correct to assume there’s a fitting present to hook up a gauge? If not, I suspect folks are just retrofitting...

Thanks. What documentation are you referring to? Dana Spicer and/or TM?

See attached picture. I got it from the TM as part of their "5 flashing CTIS lights" troubleshooting. It is located in the passenger footwell...the PCU? John

Understood—thanks.

Answering your question...Pin Z was twisted with a wire in the harness...it didn't get joined to another pin on the plug end. Pin L on the plug is actually snipped at the back of the plug and is going nowhere. Also, thanks for the other information. I will have to chew on that after work. By...

Thanks for the info!

Good morning, I have a 1998 M1088A0 with a CTIS issue—go figure. The ECU is flashing 5 lights. This site has assisted a bit in initial troubleshooting by providing the Dana troubleshooting guide as well as the TMs. Doing the first couple of steps in the TM lead me to an electrical issue. Why...

One thing, for sure, that I appreciate is good advice...even if it isn't want I want to hear. I was hoping the M322 would be a fit due to how cheaply I would get it for. My towing needs are simple, I need to tow a skid steer at 10.5K lbs and a mulcher at just under 3k lbs. Am I correct to...

Moderators, I did post this question in the trailer section under an old thread…I can delete that one if I violated a policy. I have a question that I have not been able to find the answer for myself. Here it goes: I just bought an FMTV (M1088A0) and I need a trailer for it. I have access to...

I know I am replying to an older post, but I have a question that I have not been able to find the answer for myself. Here it goes: I just bought an FMTV (M1088 A0) and I need a trailer for it. I have access to an M322 but I am concerned about the pintle rating. The TM says 21K max for the...