Search results

Hi larryhr Any luck, if it still doesn't start try some tips in the post "cucv losing prime" we also after all that found out that the LH bank of glow plugs was not firing all the time due to the splice at the end of the orange wire were it meets the green wires at the glow plugs, was lose...

Not in an M1010! :grin:

Losing Prime fixed Well, problem fixed, before I got to the Filter Block. We were going over everything and realized fuel was OK, we had pressure everywhere. so we went back to the electronics. Sure enough we were digging around and saw the meter jump when we were grabbing wires. Turns out the...

Just finished trying our down hill test, It sat on car ramps since last night. Nope, I could have cranked it till the batteries died???? Next I guess Sat we'; try swapping the filter base with a known good one and cross our fingers!

What was your final result. It's your tread but as you can see by the last few post there are several of us with the same issue, Did you find the fix? Our 1010 has a new tank, new hoses and clamps most everywhere, a new filter, new pressure switch and lastly a new fuel pump. We tried the crack...

Never saw any extensions, but that is not unusual. There are usually a couple items in the TM's that we never saw in the units. I'm sure it won't be too hard to rig something.

From what I remember, you won't be able to use the jacks while on the trailer. I only remember them lifting to no more then a foot or so. The jacks were stored on the inside of the entrance doors, I suppose if you set up a stack of cribbage you could. all this depends on what type of box you...

Just a bit, that's why my son picks them up now. But to me they are the best, nothing equals the power they put out! At least in my opinion.

Got our new 6TL batteries installed!

We're having the same issue now on our M1010, but fuel pressure is low so trying a new pump first! We'll get the bugs out sooner or later!

Welcome from Mass! Good luck with your 101 project.

Welcome from SE Mass, we're down in the Foxboro area, but we do Parades yup in your area as well! Starting in April we ar at Bass Pro in Foxboro and meet there every other Thursday till Oct. Lots of fun! And of course there are Military shows all summer long! Enjoy! Feel free to ask anything...

Welcome from Mass, Good Hunting! Are there any others in your area or a MV club! Also something to look for!

We use a can, with foam inside and magnets to hold it in place and it fits the theme!

Mvc Check out MVMVC, they are huge and full of great people! http://mvmvc.org/weare-rally/ Welcome From Mass, and enjoy! Nice Truck!

Hello, Sorry it took so long to respond, I think I over looked your question! We are bringing it back to Army Standards, less the RED CROSS Panels! Then we plan to use it to sleep in at some of the Vehicle shows we attend locally! On a side note, I knew Frankfurt well, I spent 3 years there in...

Finished another paint job on our newly acquired M1010:-D Before After

Correct now Well, hate to spoil it for some, but I've worked with this stuff for 20 years now and happy to do it! Check out the Behr sites! That's a good ole coat of Home Depot Behr Paint! I like the Green better than the Tan as well. Good luck! Rick

Still working out issues on our new M1010, But she looks much better now! BeforeAfter!

This says it all. Bottom line as long as you are not trying to do anything illegal and explain to anyone who asks that you are showing a historical version of a vehicle you were assigned to at such and such a time. You won't have any issues, unless like stated some state adds something into...