Search results

You won't find that adjustment in the TM. It's factory set and is secured in place with a safety wire and lead seal at the factory. So for a starting point for that adjustment I took measurements of that adjuster on my two 831's. The adjusters height from the plate to the top of the bolts were...

Those likely are lot codes or date codes on the device which will vary.

The IRFP450 is spec'd at 500V and 14A. Looks like you probably ordered the right one. What make and part number did you order? To get the exact specs you'd need to determine what manufacturer made it. The specs vary slightly from manufacturer to manufacturer. Usually there is a...

https://www.steelsoldiers.com/showthread.php?154446-All-the-TM-s-you-need-to-work-on-the-MEP-005A

See section 5.3 in --> https://www.steelsoldiers.com/showthread.php?122965-FIELD-AND-SUSTAINMENT-and-MAINTENANCE-2k-THRU-200k-TQG-GENERATOR-SETS Some info about it..

Congrats! The pictures aren't the best resolution so it's a bit hard to make things out. I looks like that one of the mechanical governor adjustment bolts may be missing.

Remote Start Controller Kits For use in MEP-802A, MEP803A, MEP-804A, MEP-804B, MEP805A & MEP-806A Generators WiFi Remote Control & 2-Wire Start/Stop Features include: · Remote genset Start/Stop via WIFI via cell phone, laptop, tablet · Direct WiFi communication. No router needed...

Replacement Governor Controller Modules for the SLC100 Part Numbers 2990-01-477-1371, 98-19539 Used in MEP-831A & MEP-832A Generators $220 Includes USPS Priority Shipping in the US and to US Territories & Guam Shipping outside the US will be actual shipping cost PayPal & Checks accepted...

I have a version of my 802/803 WiFi Remote Start and monitor system for the 831 already which includes the variable Governor Controller electronics for the the 831 with the Inverter. Just need to re-spin the PCB into the final version and build some units. I'd need to evaluate if it's cost...

I've reverse engineered the original battery charger and now produce replacements. Will be looking at modifying that design to support the conventional gen head. The change is the original charger uses ~50 VAC from the PMA @ 150-300 Hz. The new charger version will need to use 1 leg of the gen...

I'd suggest you download the respective -24P TM for the generator you are wanting to convert. The -24P TM is the complete parts list for virtually every single part of the generator not including the engine components. For parts that differ between the two 60 & 400 Hz versions such as the...

An easy way is to go thru the respective -24P TM and see which parts are unique to the 60 Hz vs 400 Hz version. Simply search the PDF for the respective UOC code.

Tm 9-6150-226-13 https://www.steelsoldiers.com/showthread.php?111930-Tm-9-6150-226-13

Looks like it's a power distribution box based on the legs supporting it in the first two pics.

The limitation at the moment is the tiny 8 pin micro controller on the present Governor Controller. It only a couple of inputs and outputs that can be utilized. What I'm working with at present is one of my Governor Controllers and hacking it up to see if the concept will work. Still working...

LITD Thank you for that very kind offer! I will certainly be in touch with you when my plate finally clears with the 3 on-going products and I have time to address goodies for the 002/003. May not be until some time in the fall.

Guy, Presently I only have 831's and an 802 in my possession that I can use to develop products. If I get my hands on or easy access to other generator models I could tackle some of those items. Could you PM me a list of replacement PN's that are in high demand?

Project completed. MEP-831A Battery Charger repair kits and repair service available now. See ad in the Classifieds in the Parts section.

Could you repair it with some JB Weld?

Yes