Search results

Yes, 3 pieces for the main run-flat, 2 each beadlocks and 1 internal rim cover. Then you have the tire, rim halves, ring gasket, valve stem and 24 paired lugs.

Sending some more fotos;

Have included lots of fotos of the tire / rim dis-assembly. Everything looks great, even the rims (will measure tomorrow) and inside of tire. These run-flats are different to the ones shown in the old TMs. Will look more closely to confirm there are no cracks in the run-flats. Have included part...

Finally got the spare tire opened up. It has magnesium runflats. (I though the Army and possibly other military branches discontinued the magnesium type!!???) Is it possible to remove the run-flats and reinflate the tires -or- are double bead-locks required. I never de-flate the tires to less...

Thanks Not sure why the 2 rim / tires sets are out of round.

I live near Incline Village. Have an '86 - M1025 slantback. I also need some help with HMMWV rims / tires. see below...

Anyone in the Reno area that I can contact to replace two (02) of my HMMWV paired 24 stud rims / tires?? I have never worked on a split type rim / tire assembly so need some help.

I have purchased the Centramatics but have not installed as I still need to change out two (2) bent rims. I do not think that I can changed these out by myself so wondering if someone knows of a place near Incline Village, NV that could do the work. (I can travel as far as Sacramento, CA). I...

Thanks Glad to know others are using the Centrmatics.

Thanks

Will do, I trust myself for the measurements. I have never used wheel balancers, do they work? Have you used these before?? I just checked Centrimatics website and they have Hummer H1 Model 370-800 for sale at USD 279 for 4 pieces. (Presume these will fit the Humvee) That is a reasonable...

Thanks Responses on SteelSolders Forum are very helpful and guide the blind from making mistakes!! BTW, I agree, the run-flats save lives. I just went on the Mod Mafia website. Too pricey and their rims will not allow me to use my existing tires so it is a "No-Go". If I can get the out of...

Thanks I agree, run-flats are so much pain. Wish I had the money to purchase the Hutchinson (www.hutchinsoninc.com/) Rock Monster rims (double bead-locks) for HMMWV / H1. I do not think Hutchinson sells direct but did find a website that does; www.modmafia.com The set up is called "Mod Mafia...

thanks for response. Crazy to have fight with these tires and rims!!!

I took my HMMWV to get all ( 1.5 years old with 5K miles) wheels balanced, including the spare tire (37x12.5x16.50 Radial Load E MTR). The dealer was able to balance the 4 but was unable to balance the spare that has never been installed. The dealer said the spare rim was out-of-round. When I...

Gents, Have stripped everything out, tons of sealant and rust. All scraped, sand and painted. The block and tackle (2X) worked well. The new rubber and snubbers in place. Roof is back on. Getting ready to start re-assembly turret plus weather resistant activities based on comments above (wish...

Have removed the bearing (no existing gaskets!!!) but with a great deal of effort as there was sealant everywhere. Took a while to lift the top due to sealant!! Bearing rotates reasonably well with no dragging. Have lifted the top with block & tackle (at each end). Will drive HMMWV out from...

Thanks I have the gaskets now. I have dis-assembled down to the bearing. The retainers were very rusty and deeply corroded. Most of the bolts are are also corroded. Will need to changeout a number of the items!! Tons of sealant to remove!!!!

Thanks so much for your time and effort!! Great guidance write-up. I have received all the seals for; top, turret and windshield. Have printed out all the pertinent TMs (Parts & Maintenance). Will go through the videos also so I have a good understanding of the sequencing. I did not order the...

I just noticed, your HMMWV is black and so is mine. I have some of the missing parts in my crawl space for now. I took them off awhile back. Planning to use two (2) - block & tackle to lift the top and install some spacers, if any slippage in the lift. If this gets too complicated, I have the...