Search results

You have to change the color after you cut and paste. I have one mount and one mud flap if anyone is interested. The mud flap bar has a little bend in it, works just fine.

AZ Mitch, Welcome to SS. Great info. here. FYI, I have a Nice M934 and a M931A1 for sale. PM for info. if you are interested.

:ditto: Some times they can be a bear to disengage or engage.

10wt oil comes in it from the Military. But I think any good hyd fluid would work fine if you change all of the old out first. I put 10wt back in my m936.

WOW!!!! That sounds great. I can not wait to see it.:drool:

Welcome and have fun with your truck!!!

I did a boot some weeks back and the wire clamp had the nut welded to the wire clamp, that is the way to go. A lot easier to start the screw.

Looked one more place.. Black 1 Purple 2 White 3 yellow 4 Good luck!!

Sorry, I looked at all my trucks and they are marked with color bands not nunbers. Not much help.

Welcome to SS, lots of info. and help here.

No you do not. Remove the safty wire, screws, metal ring and the old boot. Also the wire ring that holds the boot on. Then clean the axle area and put the new boot on. But you need about four hands to do it.

Rick, I think I met you the other day when you were getting some parts in AZ. Are trying to engage the pto when the trans. is in 1-5? That is how you need to engage the pto. Then to run the winch you move the trans. back to N. I think when you put the trans in 1-5 the pto should stop turning...

Jimc, Very nice job!!!

Thanks I will look that up about the stuck plunger.

Has anyone rebuilt an injector pump from a MEP-003A before that can help with my problem? I think the fuel shutoff is working ok.

I have a winch for sale, but the shipping is the killer. Heater, what is that??? LOL I'm in AZ.

WOW!!! Glad you are ok!!

When I took mine out I had to use some heat to get it out, also a big hammer. Just keep working on it with oil, heat and Big hammer.

I picked up a M970 fuel trailer with a Onan 4 cly motor on it. I changed the fuel filters and flashed the lines out, than I tried to start it and I can not get it started. I think it is the same motor that is on the MEP003A. It turns over but will not fire up. The injectors or not getting fuel...

I got my tow bar from Carnac this morning. I meet him at the TA truck stop along I10 on his way back home. We talked about trucks a little then he headed for home in TX. It was good to meet him for the first time.