Search results

Congrats on truck , hey 99 percent of us use them for fun and parades but do watch the matenence parts are pricy and heavy And your right a smile or several makes all of it worth it !

Bump

That I never doubted , we might need that street next to the church to line all these up , last year we had two rows , better yet let's get there early and make a thirs

No cable just a valve . Just make sure your pintle is large enough

Enter that in mv of the month !!

Don't know the reference page but it pretty straight forward ... After tranny is out just bend the tabs flat on the lock ring and remove the 6 bolts on cover plate , then remove and tap in new seal with soft wood block ...... I always smear a thin layer layer of Rtv on the lip

Seriously get on touch with jeep sinker , a great guy and knows what he is doing

Oh that is awesome

looks like there will be a party at my house july 3, :)

Ok I'll add my 3b/m606 since I haven't seen one on here

It is a great time Tanker ! the Parade starts at 10am I think we need to be there about 8:30 at the latest, as we have to line all these big girls up. The address is 744 Roswell Street , Marietta GA 30060. Ken and Andy you have a place to stay if you can make it ! Hope to see you guys soon...

Its a huge Parade Andy you will love it , I cant tell you how much fun it is ! hope to see you and the fam there

It's a lot of fun

We are needing more Vehicles, for the Parade again this year as we will be hauling Vets through the Parade. Last year we had 20 vehicles, and this year we want more. Last year there were over a hundred entries and over two thousand people, I think our group was about the tenth in the front...

Memorial Day

There is. Bypass valve on the compressor that bypasses around 120 or so since the compressor has no clutch and runs continuously , that's where I would start

O rings in the HH that's my two cents , also bypass FDC easy to do

Congradulations

First thing is round the corners of the plates both above and below , and make one plate at least one in wider , the reason is not to keep the plates from the scissor effect or easly cutting through . If you really think you gonna role it : with your skills , just weld a plate to frame (...

If it's older the power is constant ,,, the ground makes the connection ... I.e. Horn blow