Search results

The only time a headbolt gets replaced is if there is pittimg in the fillet, the shank is heavily erroded or it is stretched past it's limit. The studs are very robust on the multi and they are a low torque item. As for shaving them, get a sanding block and clean the face...don't polish it, just...

Hey look, that's my flag, it's famous! :beer:

All the crap for dirt camping used twice a year at Dirtbag, tables, chairs, cots, 10 man arctic tent, BBQ, stove, lanterns, food locker, cooking locker, bonus road repair parts for the deuce, a spare or two, flag and pole, shovels, rakes, cribbing wood and when the time comes, clean up tools...

The last time I did a cooling system repair, I put a petcock in the intake manifold just in back of the stat. After the radiator filled, I put a pressure tester on the rad and gave it a few pumps 'till coolant came out of the vent. I then had to add about a gallon of coolant. I do not have a heater.

Yeah, these are hard to fill and bleed, even with a fresh radiator. Another thing, DO NOT run the engine without a stat. These have two cooling loops, block and radiator. When the stat is closed, the stat shunts the coolant through the block loop. When the stat opens, it covers the hole in the...

I think it takes a different B pillar. I think I know someone who is gonna have a spare top soon.

Get a heel bar and pop it off with that. It will just slide right off. Maybe someone used loctite on it?

The multi is tough to get all the air out. Another thing, verify the dash gauge with a known good gauge. You could be chasing your tail!

Another thing to look at is the manual shut off. If you used that to shut the engine off last, you'll need to manually go flip the lever back on. It is located at the outlet line off of the pump.

I know, not baggin' on ya. :driver:

Coarse ground pepper or a cigarette or two. Put a tablespoon of pepper in the radiator and run it. A cig will do the same thing. Put the tobacco in the radiator and it will plug the leak like the pepper. Both have got me outa the woods..well, desert actually! Will work for 6 months or so.

If that blows yer skirt up, do it up! I am not a "bob" fan.

See here for shirt info. More to follow. http://www.steelsoldiers.com/upcoming-events/57858-fall-dirtbag-shirts.html

Try here for your intake hose. It's under the EDPM sleeve or hose section. Purosil Silicone Hose

Before you go and do the gasket, make sure that is what is leaking. Oil runs downhill and the fan will blow it all over the place. Look hihger on the engine. The leak path will be the clean spot...as in no dirt/dust stuck to it.

I'm across the country. Usually takes a week or so to get my order/.If there is an issue with out of stock items, I usually get a phone call.

I believe the last post is what got things rolling. He was WAY out of line and the language was something reserved for a bar at dockside. 2cents

If you like you could. Won't hurt anything.

Correct. Disconnect at the t-case and engage the lever to clear the line

Disconnesct it under the truck where it goes into the t-case. That will clear the line when you flip the switch.