Search results

I got a set of stock NOS blades from Saturn and they worked perfectly on my M35A2.

I have a brand new 25' reel of 2/0 4-conductor SO cable manufactured by Alpha for sale. If interested, send me a PM.

I agree completely with Heavysteven. Forget the mods until later. Make sure the brakes are in good order. I drove my Deuce ~700 miles home from Fort Indiantown Gap, PA to Hiawassee, GA last year with no problems. I was lucky in that all fluids were fresh and topped off, good batteries, and...

The fuel pressure at the injector is extremely high. If you loosen the fitting, you shouldefinitely see fuel seep as you crank the engine over.

What about a neighbor? You may be like me with no neighbors close by.

I would immediately suspect that whoever did the head gasket repair reconnected some wires incorrectly. Too much of a coincidence that the problem started when the vehicle was returned to service. As Ken mentioned above, download the TM and trace all wire for proper connection.

It is not that complicated to start the MEP-003A. I would recommend installing a manual transfer switch and training the wife, et al, how to throw the switch and start the engine. My wife picked it up without difficulty.

I lost 5th gear in my M35A2 and decided to replace the transmission. A good used take-out cost me $200.00. Shortly after I found another good trans for only $100.00. I find it hard to justify the time and trouble for a trans repair when good take-outs can be found for reasonable prices. I...

Congratulations on getting your EUC. Where is the truck located? Is it driveable? An alternative is to have it towed off base by a local wrecker and stored temporarily until you can pick it up.

Ditto! If you want a winch for your M35A2, find the correct winch. Overloaded winches and cables can kill you.

I think we are mixing things up a bit. There is both high sulfur and low sulfur diesel that has road tax added to the price. Previously, all diesel with road tax was high sulfur. Offroad diesel is the same as highway diesel, except there are no road taxes added, and a red dye is added to tell...

Has the transmission cover been removed? I'm thinking of the possibility that the shift forks were misaligned when the cover was reinstalled.

That is one great looking truck! I can't imagine the number of hours you have invested. Something to be proud of.

You need to click on the 'Manage Attachments' button under Attach Files at the bottom of the page when making a post. You will then need to brouse for the photo you want to upload from your computer. If you have more than one photo go to the next line and do the same thing. After you have all...

The 24087 is not the correct color. This is semi-gloss OD. It should have been painted with green CARC. The Gillespie 383 should match if you don't want CARC.

My MEP-003A also puts out 27-28 VDC. The alternator should put out 6.5 amps with completely discharged batteries according to the TM.

That looks like a very nice setup. I plan to do something similar. I was going to neck up to larger flex, such as 2-inch, to minimize the potential backpressure problem, but now it sounds like this isn't much of a concern. From the fourth photo it looks like you might be cooking your tire...

I agree about the unit crest. Since it is a triangle, it could be from an armor unit. I would recommend sanding off the triangle and see what is under the paint. Also, do you have any idea where the truck came from? Was it assigned to an armor unit?

I measured the length of hose on my adapter assembly and it measures slightly over 25 feet in length. There is a metal tag on the hose that is difficult to read from the photo below, but the text is as follows: DCU LOT5-13-4 894B90071-05-2992 69-668 A-310 82 PT OPER 3000 PSI CURE DATE 3082...