Search results

For the winch control I'm going to add a switch next to the remote winch hand controller plug to select Front or Rear winch. This way I only need one connector and controller and can easily switch between them. I also have a couple Heavy Duty Winch Controllers from a larger truck. It is a...

I started to fit the winch to the rear mount. I rotated it to lay the solenoids down and line up the bolt holes. The first issue is the winch cable feeds from the opposite side of the winch so it needs to be rewound on the spool. I set the winch to free spool to pull the cable out and that...

yes

Got the comms working today, one of the headsets has a bad ear. Replaced the headset and all is good now. Also started working on the Rear Winch install. I have a rear winch mount and lines as well as the control valve and I have been looking for a winch. I came across and article about...

To add to what he said, the inspection is only required if the vehicle is driven in Vermont. Inspection laws are not enforced state to state. If you register it in Vermont and drive it in Florida no inspection would be required. You should have insurance since most states require proof of...

Don't sell it to a junk yard for $500, I'l give $750 and come pick it up! :D BTW, what year is it, in some states titles are only required after a certain year.

He died a few years ago.

I'm sure you probably already tried but I have found some useful pictures looking at gov planet auction picture.

Thanks I understand that so I'll make an assumption ... since A and B are on the MCS-L and they don't make the tone, is the tone associated with if the ports are available? Any ideas on why the INT and INT2 communicate with each other? Am I wrong in my understanding they are separate...

That is the EESS pulsing the glow plugs. Normal operation for that version of the start box.

Ok so the manual I had is not a direct match to the device. I did add the 2nd highway cable because I had it. I did find the cover on the bottom and found a switch and moved it 1 position and tested it. That solved the static problem. The other issues continue, tone in C, D, E and F on...

Thanks for the reply and I'm not questioning your experience. I did check the manual referenced and there doesn't seem to be anything about the Lite system in there. I have been searching the internet all morning and have found some vague information about the system configuration however that...

Thanks but this is a Vic-3 Lite system not a Vic-3. That TM doesn't apply and I also don't believe the there are device addresses in the Lite system.

I've read your thread on them including the part about using Bondo to fix structural cracks. I wish the best of luck with them.

I have an essentially new Vic-3 Lite system with new Bose headset and out of the box it has some issue. Note all cables except 1 headset cable are new. The Vic-3 Lite controller seems to function 100% and don't suspect any issue there. The Crew Station seems to function correctly in the...

I'm not sure how closely you looked at them but one is missing the entire window. Another has a smashed in door lever. All need seals and glass. There are other missing parts and parts that need to be replaced. And I'm not sure what Bondo you are using but Bondo isn't for any structural...

I agree 100%, I've bought a few things off him and he has always been fair and helpful.

I wouldn't give half that for them. All the windows are gone and casings damaged. Damage to some of the mechanisms and missing parts. The fiberglass needs work. You'll probably have another $1000 into by the time you have them all fixed not to mention all kinds of time. You'd be better off...

Remember, No one has more money for R&D than the Manufacturer. There is a reason it's built this way and it's not just because a GDF sticks down too low.

There is a lot to it and if you have no experience with even simple swaps then you need someone that does. It's not hard but takes lots of research to figure out all the parts you will need. The basic components are easy but all the little details and figuring out part numbers etc is time...