Search results

What year Fmtv are you considering doing it on?

I used the original one as a template and made a new one out of black material that matched the original material.

Are the bearings you’re finding about 1/16” diameter x 3/16” long? That’s the size of broken bearings I found in mine attached to the output speed sensor. Before discovering them, I trouble shooted Everything else imaginable. Then discovering the broken bearings and contacted different...

The connecting rods come with the door lock kit. The door lock kit comes with a remote receiver box for the key chain remotes to work with. you can always call me 863-781-0165.

I designed and fabricated it myself.

Nice job, could you include part numbers?

What Is “IFS” and what does the IFS kit do?

About 10 hours of hand stitching use wax coated lacing string.

I have a 2003 A1 and I have experienced a ABS light. I had just changed out the axle gears and in doing so I accidentally bumped one of the sensors in the front axle out of range. It was a simple fix, just follow the sensor wires and push the sensor back in so it’s back in the proper position...

Nice work!

.080” aluminum sheet

The overhead console I made was a one off build, with very little documentation. But I started with making a template out of card board the transferring it to aluminum sheet then about 50 small adjustments, cuts and test fits before final welding. The doors are made of 1/2” Star Board, cut and...

The one I used is a continuous loop, so the stroke is infinite. Mine goes all the way up and down.

Biltek 2x Door Car Power Window + Keyless Door Unlock Kit For Ford F-350 F450 F-550 Super Duty Fiesta Flex Focus This is what I ordered from the amazing......online store. $83 like I said earlier use a better quality wire and connectors than they supply you with. They are still working as good...

This kit that I used came with a back up crank. Just pop off the cover where the old crank was and put the back up handle on that I keep in the overhead console. Just run wiring across the front along with all the other wires. The area that has the most room is just in front of the heater/AC unit.

The seats were purchased from the online auction site and they are dodge caravan second row bucket seats with arm rests. I’m guessing they are take outs from when they do the van conversion for handicap vans. I made the boxes out of 3/4” Star Board. I made the liners using the material from...

Here are some pictures of the lock and window install. My biggest tip is do not use the wire that they supplied you with and use good quality wire.