Search results

I have lots of experience with both of those items on my A1. That photo you posted of the battery load controller, if bad (mine was) had a trouble light in the dash showing not charging even though mine was charging it also has a small hard to find LED light on the load controller green when...

Please put my name on one each of those brackets. I was in the processes of designing a mount to go on the generator side and adding a V pulley to the generator pulley. Instead of a idler pulley I was going to making the compressor bracket adjustable. But I much rather go with original parts for...

Thanks but I found the design and dimensions in the tech manual.

Here are some picture of the set up on a members 2008 LMTV who was kind enough to go out in the cold and get them for me! Thanks!

Yep, thats the beast!

So the brackets are one part of the puzzle. Does any one have the other parts, such as the idler pulley and the pulley that goes behind the fan or replaces the fan pulley?

Ok figured out how to post pictures. Here is the lift bracket I fabricated and another pic of the flywheel.

If I could figure out how to post pictures "MacBook" I would show you the cart I made to lower the trans onto then roll it out on the passenger side after also removing the muffler. I built it as low to the ground as possible to clear the frame. Lmtv722 and I removed the one I have and we...

To answer your original question I have a 2004 transmission waiting to go in my 2003 LMTV and the tooth count is 134. I'll try attaching a photo.....I tried with out success.

Thanks, But I'm looking for just the center section with the 3.07 gears.

Looking for MRAP 3.07 gears/Centersection for my M1078/LMTV!!! I've read all the old threads but looking for a current source. Thanks

I personally don't recommend the balancing powder, from my own experience with it in my RV tires. The previous owner put that stuff in the tires and I was unaware of it until the family was on a cross country road trip as a responsible person I would check tire pressure every other day or so and...

Can you describe your symptoms that make you think the alternator is bad? I have an 03 M1078A1 that had multiple warning lights referring to the charging system and have fixed all but one.

I'll need to do this to my '03 A1 also, as it seems all A1 LMTV's the rubber used doesn't last very well. If you could please share with me where you acquired you body mounts so I can replace mine as well. My rear sway bar bushings were also rotted out and missing all together. I searched and...

That's kind of what I thought, 55 is fast enough! Enjoy the scenery. The true difference in time is insufficient, 250 miles only takes an extra hour comparing 55mph to 70mph. But what type of mileage do you get at 55 with the higher gears?

From what I understand there is a secondary pump for the transfer case that uses the passenger side PTO output of the transmission to run it. Allison rebuilds practically every model except the MD 3070. I did find 3 different companies that would rebuild 2 of them were right at $8,000 and 1...

I picked up a used transmission but was still wondering what may have caused the problem to begin with. Any suggestions?

Has anyone actually changed out to the Transynd or any other DexIII fluids and have some serious miles logged (over a 1,000) with the new fluids?

My M1078A1 2003yr had all the fluids drained when I picked it up from GovPlanet. So I filled my Transmission with DexIII and it ran well until my first 100 mile round trip and 1/4 mile from home it shifted into neutral and rolling to a stop. Turning it off and back on a few times I was able to...