Search results

I knew it wasn't a drop-in part and would require drilling. It was very easy to install. Just posted the pics and info for anyone else who's interested and might need to do same thing. Definitely a plus on the money part. I never found a NOS exact replacement part anyway. My Fluke and...

New one and Old one.

New part arrived Not exactly as the old one and mounting holes didn’t line up. I already knew this before ordering part thanks to another thread. Just made a template and was able to reuse one of the original holes. Expanded one other and Drilled two new holes. Sealed the other holes with mil...

Very important info!! Appreciate it

Now I will never forget that bit of info Thanks!!

They ride surprisingly well. (Old Fire Finder Radar Trailer modified by Raytheon). I took this setup, full of water and Dawn dish soap, all over rough dirt roads and the ranch itself to agitate the water for a good cleaning inside. Worked very well. (Edit; Picture shows full tank, but the tank...

Post is almost 10 years old. I’m sure it’s long gone by now.

Received the new replacement transducer. Question about the wiring. The +- wires are obviously easy to figure out. What about the other two marked L? Original one is marked 1 and 2 Looks like it wouldn’t matter but I’m not sure.

I have not. Some on here have done it on the M101A2’s. If they fit on yours, why not. I personally have no interest in using them. I like to have eyes on the parts when adding grease.

Don’t hope…….CHECK If you haven’t physically looked at your bearings yet, recommend you do so ASAP. They are probably fine, but lots of examples of trailer looking just fine, and bearing’s are toast with rust and/or no grease, etc.

Great setup Hard to tell from pics, but it looks like the IBC tote needs secured better to the trailer itself. That’s a lot of water weight and the bouncing around in your area could cause load shifting issues.

It will tell you, but any trailer or tractor supply store will have them in stock.

I edited your Thread title so it helps identify the content.

That appears to be a free-Back unit. Allows trailer to be backed up loaded and it will not apply the brakes as you back up a hill. Dexter makes them. It’s a great system. They also make them as an upgrade to the M101A2-3 trailers so you no longer have to use a lockout pin. Everything you...

All it takes is money. What it takes to get one of these legal to fly, let alone to make any money with it, is astronomical. Background checks, pilot training, parts, inspections, overhauls, operating costs, certification's, etc. Yea, auction price is cheap. This one is going for more than...

The TM's for your trailer are free for download on this site. The parts manual will have the part number your looking for. Actually finding the correct ones for sale might be another matter.

Reviving this thread. Good info Just ordered one for my MEP-002A Resurrection.

Ordered one of the TRC Frequency Transducer 10380 units. This is the one currently installed

Agree.

I don’t think so. No evidence of it being flooded to be found. It has however, been sitting outside uncovered for years in rain and snow. The panel was probably facing to the SW and would directly catch the spring thunderstorms full fury. What’s the fun in getting a surplus machine that...