Search results

I have a M1083A1 that has some electrical problems that I assume involve relays. Now my problem is that I have a TM for M1078 and in comparing the picture of the PDP on the 1078 it is different from the 1083. I am trying to locate the Horn Relay and on the 1078 it is K32 and on the top part of...

Thank you/ Like I titled it "Steel Soldiers for Dummy"

Well Sir I am your man, the one not in the know on this. Good information! One more thing, where do I find Post 12? I truly didn't and don't know how this information is arranged. I am sure it has a beginning and if it is Post 12 please say where I can find that. I'm sure I'm not the only one...

I really appreciate that information. I am going to look at the Manual Numbers and see how that reads out. If I have any questions and I'm sure I will may I come back to this thread and bother you more? Lugnuts

I am not familiar with the Tech Manual Protocol and Categories of arrangement. If you have the time could you point me in the direction or explain the different categories. If not I understand. the -20 and -30 doesn't mean anything to me. Thank you

Thank you. I did look that up and you are absolutely correct about the instructions. Unfortunately it is a different style door on the LMTV than the 809 Series and the instructions just weren't there. It was for the flat glass including the windshield but not the door glass. There again I most...

Appreciate the reply. I have the Manual and it listed the winshield and flat glass repair but did not list the window glass replacement. So I went ahead and figured it out. Thanks for the response

So I went ahead and handled the job since that is what I do, and I figure I will post this for the next person who wants the information. Thanks to all the persons that have helped me in the past and will help me in the future. Hopefully this well help someone. Caution: Alcohol is not a...

Removal is not like you expect. I just finished the job and I guess I'll write it up. Thank you for you response

I did and that just deals with flat glass of the windshield and cab flat windows. Thanks for the search tip/ Lugnuts

Production date 10/98 (see guys I'm learning) I want to replace the door glass that goes up and down. I've searched the threads and can't seem to find anyone else who did this. I searched my manuals and I have found all the flat glass replacement but not the door glass that goes up and down. My...

I sure could use some educating on the use of the website. I have asked questions, got tremendous answers, and just when I thought I was getting the hang of how to use this website I discovered I was so wrong. I need to replace a driver side door glass on a M1083 and I thought for sure getting...

Did you find your door glass yet?

So here is my end conclusion to this matter/ I replaced the existing starter in the Model 813/ The old starter when cranking was drawing 934 Amps and when the truck was hot it wouldn't crank until cool/ Now Starter was replaced with 12vdc gear reduction starter and tested when cold/ The amp draw...

Was this really a problem for this truck?

Thank you for answering me. I went to the pages in the manual that you stated and yes it is there as you had said. I did not find it in the Table of Contents mentioned anywhere and after leafing through many pages and what I thought was going to the end of the manual, well let's just say I was...

Good Morning Gents I downloaded TM9-2320-365-20-3 as recommended and I cannot find in the manual schematics pertaining to this unit. I did not find a listing in the content of the manual any schematics. You have the schematics andI don't therefore one would conclude that I am doing something...

Thank you and will by-pass to see if that is actual problem.

Gentlemen Thank you so much for your time and knowledge. I worked on the truck today and for information the production date is 10/97/ Apparently it is an A0 model because of the descriptions that were sent as to what an A1 is/ I do need one of the boxes or the answer to who rebuilds them...

Where might I obtain a Polarity Protection Device for an A0?