• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 4XDesign

    My M3 Halftrack

    I really like the 800 series trucks as well the HT will look right at home behind it!
  2. 4XDesign

    Cummins 6CTA8.3 Injection Timing

    I talked to a friend that messes with a lot of smaller cummins. He asked if the pump has hydro advance and I did not know. But thought I'd throw it out there to make sure it was thought of or considered. If more rpm equals advanced timing it could over time the motor with an advanced pump...
  3. 4XDesign

    Cummins 6CTA8.3 Injection Timing

    Ive been looking at upgrading the turbine and compressor wheel in the hx. I'm ready to follow your tutorial on the timing...!
  4. 4XDesign

    Tire hop

    We actually took 14.00 XZL's off of my buddy's bobbed 931. They rode smooth on his truck before we bobbed it. We pulled Ctis installed them on my 925 long tractor and they bounce.
  5. 4XDesign

    Ultimate 5 ton tractor

    This will be an awesome build!! I'm not sure I completely understand the 800 series and 900 series cab configuration. Moving the axles is no big deal just take a rubber hammer to knock off the rivets... Also what benefit is compound turbos? I am seeing 35pis or better from the stock turbo...
  6. 4XDesign

    Bandit's M931 Repower thread

    It should pull like a train especially since it's not singled out. It's going to be awesome!
  7. 4XDesign

    M925A2 to M932LA2 Conversion

    I measured it today it's 42"s
  8. 4XDesign

    M925A2 to M932LA2 Conversion

    Here are a couple more pictures. I'll measure it this morning because I can't recall. It's looking like the spare tire rack will fit nicely behind the cab, this will even out the look of the tanks being a little longer. The tank brackets gave me a fit because of the transfer case mounts. The...
  9. 4XDesign

    Fording Project

    I like it! It will pay off after one use.
  10. 4XDesign

    Water in transmission

    My Bobopposite truck came from the base with no fluid in any axles, or transfer case it did have engine oil. The transmission had over 5 gallons of straight water. So much that it was dripping from the output shaft. I did not have time to pull it apart before the Ga rally. So I filled it up...
  11. 4XDesign

    M925A2 Trailer Made From M923A1 Truck

    I have a 14' drop side trailer forsale it's in the vehicle section. M939 axle spacing.
  12. 4XDesign

    M925A2 to M932LA2 Conversion

    Teaser photo. I finally tore into it again today. Just testing the fit.
  13. 4XDesign

    Dual 9.00 on bobbed m35a2

    I like them all! I have a few different options for wheels that I will sell pretty reasonably if you'd be interested.
  14. 4XDesign

    South Carolina Member Database & Map

    Blythewood, SC-Jonathan select.milner@gmail.com 803-237-2570
  15. 4XDesign

    My 1984 M923 AM General maximum speed is 45 miles per hour.

    You may want to ensure the fact that it's shifting all 5 gears. 50-55 on 11.00's all day long .
  16. 4XDesign

    M925A2 to M932LA2 Conversion

    Grill on mushroom looks good it's the style that's not as easily painted. Maybe I'll pull it off and give that a try.
  17. 4XDesign

    M925A2 to M932LA2 Conversion

    I installed the same filter TMG use on their kits. It is supposed to flow 950 cfm. When accelerating the truck still pulls the indicator all the way up, but it does not stay after letting off as it previously did. I'm not sure what this means but it seems like an improvement.
  18. 4XDesign

    Deuce Bobbing question

    I build them but I'm outside of columbia SC.
  19. 4XDesign

    Cummins 6CTA8.3 Injection Timing

    Any wrenches turned in the direction of progress on this?
  20. 4XDesign

    M108 deuce wrecker engine swap

    M108 is awesome! Any chance the rest of the donor truck is going up for sale? I have an engine and trans that would go right in! I pulled cab to crew cab the triaxle
Top