Search results

I am not aware of a ready-made adapter for hooking military trailers to civilian 4-pin or 7-pin connectors. I made my own with a trailer receptacle from a CUCV and a $10 7-pin trailer pigtail from the auto parts place. There's a pin sheet on SS somewhere that shows what wire goes where. I'll...

Nice truck! I considered the Dmax too, but I am a die hard Cummins guy and couldn't resist the challenge. Good to know, David. Thanks. I have seen Auto World mentioned on the 4BTswaps site quite a bit. I'll give Kenny a call. I figure the tranny will be an issue with this truck. The 47RH...

Hi Gang, As many of you know, I traded my M925A2 for a 1985 M998. It came from a great guy in TX named Rick. It was an interesting 3-way trade where Rick got 19kilo's deuce RV, I got Rick's M998, and Dave 19kilo got my M925A2. The HMMWV is not quite home yet. It is currently in Memphis...

Very cool custom vehicle! Thanks for sharing!

Yep, I used 80/90 GL5/MT1 in all of my trucks without a problem.

Tanner, yes, I realize that the Allison 1000 uses a PCM and the aftermarket stand-alone units are $$$. I was just saying that a 4L80E does use a PCM where the 700R4 does not. jjramrod, sounds like you have thoroughly tested your 4bt/700R4 combo already. I am hoping for around 325/600 with...

I'm locking this one. If anybody feels the need to complain about it, then I will delete it instead. Please cut out the thinly veiled political discussions. Sure, it's current events, but we don't do politics here. All it does is tick people off.

Yay, Pimp My CUCV is back on again! I was tired of the reruns.

Come on guys. Show a little respect for those members who may have a handicapped child/relative/spouse/etc or they themselves are handicapped. I am not going to add retard to the word censor because that would seriously effect engine discussions (i.e. your timing is too retarded.) Thanks.

That sounds like a good project. I am gathering parts for a 4BT swap too. I hope you are having that 700R4 beefed up since the torque of the Cummins will really test that tranny's muster. A 4L80E would be a better mate, but then you're dealing with a PCM. I am going to run the TH400 until it...

Wow! Now that's a trailer! Too bad you are so far away. Thanks anyways.

Hi guys, Do any of you fellas in WV, preferably southern WV, have a trailer I can borrow? My HMMWV made it as far as Memphis and I am looking at driving down there and hauling it the rest of the way back. I need a trailer with at least 7' across the deck so a 7x16' to 7x20' trailer would be...

We have actually talked about having a vendor member category. Being a vendor member would require you to pay an annual fee, but you would get certain perks like a special title and your own forum where you could list parts specials, new products, etc... This is still in the discussion stage...

Glad you got it taken care of. Thanks for the video walk around!

Welcome to the site, Steve! We are always glad to have more folks from across the pond. Now that you are a member, it's time to buy some something big and green. What kind of rigs did you get to drive while in the service?

Come on Justin, I just linked to that in one of your other threads ;) http://www.steelsoldiers.com/5-ton-mods-hot-rodding/61590-bobbed-m925.html#post725104

Man Blair, nice work! That thing is sick.

Contact Mike Maddawg308 and Jeff TacticalTruck. Those are two SS guys that I can think of off hand that are within reasonable driving distance of Winchester. You may be able to hire one of them to pull the truck out and store it or strip it or.... You could also get John Winslow to haul...

That is a fantastic use for a M920! Looks great! Are you going to paint the whole truck desert tan? That pole building looks good too. Keep us posted on your progress.

First thing to do, go here and download the SOMARPI manual. It will show all of the air brake valves and lines in great detail. https://premiernorth.com/m939/DesktopDefault.aspx?tabindex=1&tabid=9 Then, go here and download the P2P program: https://www.themotorpool.org/forum1/uploads/p2p/...