M116A3 Help

[nvrescue]

We just obtained a M116A3 Trailer for one of our H1's. Does anyone know of a trailer plug adapter to use to work with H1 Stock Plug? Basically we need to use the M116A3 military trailer plug to work with H1. Thanks. PS: Please also email nvrescue@gmail.com if links or part numbers too.

 

[steelsoldiers]

I am not aware of a ready-made adapter for hooking military trailers to civilian 4-pin or 7-pin connectors. I made my own with a trailer receptacle from a CUCV and a $10 7-pin trailer pigtail from the auto parts place. There's a pin sheet on SS somewhere that shows what wire goes where. I'll see if I can dig it up.

 

[Recovry4x4]

The easiest way is to remove the military pigtail and build one to suit your needs. The pigtail unplugs right under the front of the trailer box. A little creative searching here might net you a thread detailing this, it has been covered.

Edit: Links

http://www.steelsoldiers.com/trailers/65378-m116a2e1-trailer-lights-rear-support.html
http://www.steelsoldiers.com/trailers/31824-civy-truck-mil-trailer-wiring-info.html
http://www.steelsoldiers.com/trailers/46019-m101a2-24-volt-12-volt-conversion.html

 

[BLK HMMWV]

Did you check this guy.
military trailer adapter harness M101A1,A2A3 M1101 M105 - Steel Soldiers::Military Vehicles Supersite

BH