Search results

The model is the Trumpeter M1083 model, I just 3D printed my modified expansible van body in 1:35 scale to fit it. Eventually I'll finish the real thing

For an even more ridiculously Overkill camper look at this. At least it has room for six people! https://bangshift.com/bangshiftxl/the-ultimate-camper-this-1994-oshkosh-m1070-het-expandable-van-just-might-be-it/ If you want to slap an expansible van body on it and you can find one in good...

Made the bows from 1/8" steel wire, 3d printed the connectors, JB welded them. Cross RC FC6 (FMTV ) model

Got to be Eco hubs!

When you get to 88 mph, you get to go back to the time that somebody at Stewart and Stevenson decided not to include locking differentials, and you get to knock some sense into him!

And to clarify one of the technical manuals has detailed drawings of many specialty tools that you can make yourself. I've converted all of those into SolidWorks and these particular tools probably would work fine as 3D printed but of course they could be machined. The flat plate tool can...

The flat adjusting tool works by bolting it onto one of the bolts in there and the slot guides your adjusting tool. The driver works by guiding the seal into position. I haven't used either tool yet I just built them out of my best material based upon the drawings provided so that each support...

i dont have a seal, but i made a 3d printed seal install tool with carbon fiber petg per the TM for unit maintenance. tm me if you would like on, ill print another. also the break adjust tool

It's that the listed gvw it came as, or as modified now if you modified it?

So you can just register the truck at a lower gross vehicle weight than it actually has? An M1078 only has a gross vehicle weight of about 23,000 anyways from what I remember.

Also since yellow and some other big freight companies went out of business there's lots and lots of box trucks and cargo vans at the auction houses

You can get the tires for a few hundred bucks in decent condition and not very old but you'll still have to replace them every few years since they only have a few years left on them. The big question is what kind of work do you do and what do you need the bed for? If it's heavy stuff you're...

3/4 of the time it'll start right up at 1/4 of the time it'll give you problems? Lol

Thank you sir, I've given that information to the seller

non running 1980 M813 needs to be transported from Vista CA to California City in Kern County CA. any suggestions? any offers?

I was able to MacGyver a solution by sliding the bar from my two jaw puller which has a 3/4 in screw into a pipe that I found that was 1.625in. It worked in a pinch but I still do want to make a permanent tool for this. Reply who among you would want a yoke puller that doesn't have all those...

does anyone have the tigertool, lisle, or similar puller you would mind measuring for me? diameter (with a precision micrometer if you have it), length, puller screw diameter (5/8", 11/16", 3/4", 7/8", or 1") and length? McMaster sells the puller screws, and for the FMTV we don't need all...

Can anyone recommend a good and inexpensive drive shaft yoke puller or something that worked well in its place? I purchased a tiger tool u-joint puller, but don't have anything to pull the yoke off the spine.

I found I had picked up this brochure at a local truck store