Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
NO, You have a hot (usually a black insulated wire), a neutral (the white insulated wire), and a Ground (the green insulated (or bare copper) wire. All three need to be hooked up. I am by no means an electrician, but I know that much.
Military says to hold the START button in for as much as 30 seconds if the unit has trouble lighting. If you get ER1, press the STOP button to clear the code, then press START again. You can do that four times before replacing the unit with a good one. I've got one unit (V3) that starts out...
It's the amount of pressure in foot pounds that will determine if it will stay or be pushed. A foot to 18 inches of water will really only affect the tires and pumpkins and you will still have over 13,000 pounds of weight in the air above it. Favor the Deuce. At four feet, the water is pushing...
I too have a field surgical sink for the cooks to wash up their hands. Heater does not work, but the rest is as advertised.
I used commercial wire stainless steel shelving, including the raised side and back sections so stuff only comes out the front. Installed on the driver's side. Also put...
With a fine paintbrush, a little bit at a time. Sorry, but that is the best way unless the letters are all flat on the top. If that is the case you can use a hard rubber roller coated in paint, just have to be careful not to let it get too low.
What I see in the pictures:
1. The accessory box (drawer and two doors) needs fixing or replacement.
2. Repair or new doors for the two M-59 ranges. Dawn (clingogf) has some for sale.
3. Four inch griddle, if it's warped, flip it over (they are double sided) or run the burner a little hotter on...
If you actually have one, just weld it back on. If you need one and know the dimensions (or are good a gestimating) talk to someone with a metal brake. Have them make one 18 to 24 inches long and test it out for fitment. If it needs tweaking, do it, then try again. If it fits, have more...
The roll pins are driven out using a small hammer and a pin punch. But do not drive them all the way out - just enough to get them off the shaft. Use an enamel paint of the correct color and let it dry very completely. Next take some white latex based paint and fill in the recesses where the...
There is a registry of DUKW's in private hands that you can figure out what the numbers should be. You will need the serial number of your DUKW and the serial numbers closest to what you have in the registry (above and below), then look at the registration numbers of those vehicles. The...
If you want to drive it in the Columbia Nov 11 Veterans Day Parade, make it to the meeting on Nov 4 at the MVCSC compound on New Way Road, across from 122 New Way Road (near the intersection of Alpine Rd and Faraway Drive - IE, near the Blue Cross/Blue Shield tower).
SECO in Augusta, GA also has parts, but they are a little harder to locate. You will need to download their spreadsheet of available parts, then search for the part you are looking for by a modified NSN. IE, Deuce Head gasket is listed as 013890664.5330 (NSN 5330-01-389-0664) which is the new...
It should end in "-10", that's the operator's level book, The "-20" and "-20P" are the unit maintenance Service and Parts manuals respectively. The "-30", "-34" and "-35" series are the rebuild/repair facilities manuals. Manuals ending in "P" are parts manuals, and there can be multiples of...
Well, my Plano Sportsman's box was not in the Mess Tent M105 trailer, and it has not shown up anywhere else either. It can be replaced, as well as the dirty clothes, the pillow and the three rally tee shirts. What hurts is that I've lost my blood glucose meter kit and my records that were in it.
From the pictures you posted, you have a dual master cylinder, and dual air packs! You can only get to the front cap on the MC with ease. Usually the front cap will be to the front brakes and the rear cap will feed all four of the rear brakes. Maxpanic, please take the skid plate off the...
PB, they were not sleeping with two refrigerators, because I did not hear a thing from your camp and the only thing between me and your speakers was Pete's camper!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!