Search results

Minus the 2 cut offs..she's in I was wondering if I put 1 cut off on the ground..would that be the same as 2 cut offs on the 12 and 24 There is probably some let the smoke out reason why that's probably not recommended

I am barrowing a great design by "Chucky" for a set of fold flat rear entrance stairs, which will slide in place of aux stairs storage location at rear.. I am hopeful this will be within climbing capabilities of my hunting partner who suffered a stroke a few years ago. If not, I can always...

Great point, what a magic box when running, what a drain when not, adding the switch/s to the set up

This so simply perfect.. thank you very much, I believe you helped many soldiers

\\MAIL CALL// Recd the sure power equalizer..now I have to figure out the wiring..More research.. Is it really as easy as I am reading, hook a wire to 24v, wire to 12v, and wire to ground and your done...

So doing some research on the rear cans.. Are Meritor X24-3276J-10 and Haldex 165406 interchangeable? What about the Type 9 and Type 12 diaphragms interchangeable with DP09 and DP12 Haldex Looking for some spares to have on the truck..

Spent the last 24 hours researching battery equalizers, decided on the the sure power 100amp, found this guy on fleabay with 6 month warranty for $150. Seems he has several if your interested search fleabay or the like SURE POWER BATTERY CONVERTER Also bench tested the 12000, motor no...

Yes, I picked that up from a post in what have you done to your LMTV.. and if I remember, it was Third from Texas. Freaken great system.. like alot Looks like I have alot more research to do on the winch. This ole sarge appreciates all the help, suggestions and opinions.. That's what makes...

Installed the inclinometer...love it with GPS. Speed volts. Elevation. Compass. Time

No, I have not yet upgraded the Alt-in the future plans.. Starting to understand what the equalizer does, still a little confused about how its wired from alt to batteries, and where is the best place to source 12V for the winch.. Duty cycle is important, and with an electrical winch...

I am intrigued, how does the battery equalizer work, can it support the surge amps the winch might draw as infrequently as it might be needed without letting the smoke out. I think we are keying in on the pitfalls of electrical winches verses the behemoth hyd winch. Thought is emergency...

According to 34-2 Section Fig-D46-52, the 12V circuit for the truck comes from rh fr battery neg (NEG) and rh rr battery neg (POS) (where i have the NOCO charger hook up, 24V comes from rh fr neg (NEG) and RH rr pos (POS).. Which has added to my confusion..

So got a question? Might be dumb.. but when I make my connections for the 12k Warn 12V winch, which terminals should I use to feed the monster.. same terminals I have the battery charger hooked to or should I use +/- on the left battery or + on left and - on right. Don't want to let the smoke...

Hot shot..its really for heui..but..it works to clear build up

HOOAH!!!! We are all fixed and 100%, stuck injector and valves just a bit on the tight side. Readjusted per the TM, put some stiction eliminator in the filter and tank, and took it for a 100mile run, and she once again purrrrrs like a cat. Glad it wasn't anything serious.

Double MAIL CALL for today.. Received the magic box (CTIS Controller) from Italy. Work of art in my opinion, Thank you Chris "Plasa" is the man, cant wait to get it installed and tested. Note: units are for testing only.. if you have questions, please contact Plasa at(y) well you know

\\MAIL CALL// Picked up this 1/2inch 100ft 28k rope FROM NozAMa Check this out on NozAMa Synthetic Winch Rope, 1/2" x 100ft 28600LBS Winch Line with Protective Sleeve + Forged Winch Hook + Black Ribbon for 4WD Off Road Vehicle Truck SUV Jeep ATV UTV KINKY LINKY

Aargh.. Tonight after a test driver, I developed a noise and smoke slight misfire, my thought about valve clearance is probably related to a stuck injector.. sounds like a hammering exhaust leak. This video kind of covers the noise looks like I need to pull the valve cover and look...

The battery box is complete..all 4/0 gauge wire

RTB runs again, although I think I need to go back and adjust valves once more.. Other than that, 100%..