Search results

Hi, Thanks for the reply on the M931 tire rack. I moved a civilian dry van that had a king pin set way back and got into the tire rack and bent it up and bent the corner of the van up also. I put an adjustable 5th wheel on it after that. Do you know what you want for the tire rack? What part...

Hi, Would anyone going to the Findlay show have a Spare tire rack for M931 tractor. Mine got all bent up. Injection Pump- good or unknown for M35A2 multifuel engine. Hardtop for the m931or M35A2 Troop bed cover for the M35A2. Thanks, Bob

Hi, Ambac is the place to order that from. The contact person is Melody Feaster at Phone: 800-628-6894 The part you need is a RG 902 retainer. It is only a few dollars....I just bought a couple recently...... Good luck Melody♫♫ Feaster, Customer Service AMBAC International...

I have what I believe is everything loose and have the red alignment mark like one on the pictures at the first of this thread which is just to the left of the casting pointer mark. Or should it be just below the casting mark pointer? I didn't want to exert to much force on trying to remove it...

I need the winch controls for a M35 and also the pto flange if anyone has these? Thanks

I have 6 bridge truck wheels and 14.00-20 ND tires if anyone is interested.

Hi, what are you asking on them, Thanks

Would anyone have a M35A2 pto flange and lever and rods, brackets. Also need a injection pump for the M35A2 Thanks Bob

From what I could tell the part numbers were for the front axle and good future reference. The seals I need are for the rear differentials. I believe they would be different. Thanks, Bob

I have a M931A2 and have differential oil coming out between the tires and on the backside of inner tire on the forward rear differential . I assume that the seal has gone bad. Does anyone know what the part number or numbers to fix this? Thanks, Bob

What is the best way you have found to get the engine rotated to get the timing marks in the HH lined up to pull it? Can you do it by bumping the engine or ?? Are there any external timing marks like on a gas engine harmonic balancer /timing cover to accomplish that or not? In the post I saw...

Hi, I got back to the farm and unplugged the pump and put the wooden dowel in the center hole of the HH and had my friend crank it over. The dowel did not move but a small amount of fuel came out around the dowel while being cranked. What does the dowel not moving indicate? Thanks, Bob

Hi, I removed the plug from the center of the HH. When I look down into it I see a hole 1/16- 1/8" in the center. I put a @3/8" wood dowel that I had at the house. I had a friend crank the engine over. Before even starting to crank it when the on/off switch was on diesel comes pumping out of...

This is on a M35a2 Hi, I am having what appears to be an issue with the IP on my M35A2. I parked the truck and came back a week later to start it and it would not start. Electric fuel pump runs. The truck was running flawlessly up to this point. I had pulled the cover off the shutoff and...

Hi, Thanks for the info on the M109's . Do you know what he wants for a transmission? Do any have winches and PTO's on them? Thanks, Bob

Hi, Would you still have the manual(s) for the M1022 Dolly you could send me. I have recently acquired one ? Thanks, Bob

Hi, I did not see a GVWR on any of the data plates. The definately are none on the doors and the doors look like they have been replaced at some point. If in filling out the SF97 is the any advantage to putting a higher or lower number in the GVWR spot on the form? Does it then...

Hi, Thanks for the info. On my dataplate it has the emblem before the words General products Division. It came back as a 1971. Is this posssible or based on this would it be a AM General? Thanks, Bob

Hi, Who is the Manufacturer that correlates to Manufacturer code 65909? My two M35A2's I believe are aroud 1971 and the data plate has emblem !/!_! with a bar across the top (can't create with keyboard) General Products Division. I believe oneBob says Jeep corporation. Is this Kiser...

Thanks for the info on Duece #1 ./ I had inadvertently left out a digit in typing it in. Thanks Duece #2 data plate & Info ID # 04D19171 ?? # 052517299 ******** corrected info ******* Stock # 23200771616 NSN # 2320000771616 DTID # W805M69153011A Location Frankfort, Ky. General...