Search results

Muchas gracias mi amigo. :)

Okay, I just measured it, the sticker is exactly 5 inches wide by 4 inches tall. I hope that helps. That should be everything you need now to reproduce this sticker exactly. P.S. just a reminder that it reads "Chrysler Motors Corporation" along the bottom edge of the sticker (not visible in...

I'll get a tape measure out tomorrow and get the measurements so you can get the scale correct.

The original pics are a little bit bigger than this. If you want them, just IM me with your Email addy and I will send them to you.

Here are the pictures of the warrantee sticker. The picture doesn't show it, but the sticker wraps under the bottom edge of the dash. There are the words: Chrysler Motors Corporation.

Hi guys, just got back from Thanksgiving dinner with the relative. Yes I do have a digital camera. I'll try to see if I can get a good picture in the daylight (it probably won't be until Saturday, since I'm busy again all day tomorrow.) Don't be surprised if the quality isn't very good...

I went out and looked at the sticker last night, and I couldn't find any kind of part number on it. The only thing it had at the bottom was the description: "Chysler Motors Corporation"

RE: Re: RE: Electrical Dilema I don't remember the exact symptoms, but I recall shortly after I installed the black out light kit, one of the relays that came with the B/O light kit suffered a premature death and burned out causing me to lose my lights (as I said I can't remember specific...

I have one on my dash that is still in good shape. I'll go out there tomorrow and see if I can find any identifying numbers...

I'd be interested in one. Do you have any more of these left, or have you sold them all? Any pictures? NOS or used?

Check Saturn Surplus for the rear stabilizer leg. www.saturnsurplus.com http://www.saturnsurplus.com/trailer/trailer.htm http://saturnsurplus.com/trailer/leg.jpg Give them a call for some of the other items, they may have them but just don't have them listed on the web site.

I got the wiring harness installed Saturday. Looks like it's going to work just fine. Should have about a foot and a half of slack once it's connected to the recepticle on the truck. Thanks again Armada for tipping me that I can use the shorter 1/4 ton m416 trailer cable! :)

I haven't had a chance to install it yet, but by all initial indications, it seems as though it will be long enough. I will be starting on replacing the wiring harness and cable tomorrow and will let you all know the results.

They all look darker. Its partly because there isn't a true color representation on the computer (its hard to get a consistent color to display across all monitors ansd setups), and also because colors have a way of lightening up when spread over a large area and since you are looking at the...

Looks like a good project you got going there. I look forward to seeing it all restored.

You'd probably have to modify the MERDC four color pattern for the M880, and/or the M886. I've got the M880 pattern if you decide you want to use it. If however you mean the NATO 3 color pattern, then that's not a problem. That one is readily available, and you can obtain it from a variety of...

I decided to take a chance and go with the shorter 1/4 ton trailer cable that you used. I looked at all the other options available, and they were all at least 2 feet longer than the one I have on my trailer right now (and that one is already about a foot longer than it needs to be.) So I...

Thanks for the offer. However I already got one on order from Frontline. Should be here by next Monday.

Hi Bob, I got those nut/fasteners from you in the mail yesterday. Thank you very much. I need to pay you for them now. I'll contact you by email on the details.

Thanks for the heads up. However, now I'm really confused, because OD Iron is listing the 8722865 P/N as being shorter than the 8722864 cable. My understanding was that the 8722864 was about 60" long and the 8722865 was around 72". However this page lists different lengths altogether. ...