Search results

RE: NJ Pine Barrens trip & Chatsworth Cranberry Festival I would take you up on this,But i have a family function to attend this weekend. Maybe next time,Mike

Might be the rear springs sliding back and forth in the spring perch on the axle, I hear mine at slow sharp turns! There is alot of movement inthe rear tandems during sharp turns.

I have two of that engine,and both are strong runners

Man ! There droppin like flys!

Do you have the gaskets seated properly on the secondary filter cans?

RE: Re: RE: SF97 from GL I recently mailed in three on Aug 5, got two titles and bill of sales back on oct 2, when i called about the third one , they said they overlooked that one :roll: But they would get right on it and the fee will be waived! Some times i just want to drive to arizona and...

I know Ziggy O has the crank up landing gear, Im not sure if he has the rear landing leg, but he might. I know he has some trailer parts. Shoot him a PM

I got a truck that came from ft. meade, All the bows are metal and the stakes are fiberglass, I have never seen metal bows before!! I think i'll be keeping those for myself! They are dropside bows to boot!!!!

I'll take an XL also !! Thanks Mike.

I think TNJ Murry might have the mounting plates. Or you could just make your own, I think joe young used to use the top plate and just make uprights out of small angle iron on the frame side, If you search for heater install on the site ,i think you will find pictures of joe's installation

Hey eric ,Did you win the lottery or something? Gettin quite the fleet there [thumbzup]

They have all size trails at RC, We drive our duece's on the larger trails!

Well......... If its cold at night, them black bears is sure warm and fuzzy :D Good for keepin warm, That is if you can fit em in your sleepin bag :shock: PS. I thought i kept hearin bears at night last year, But it was just Maddawg snoring!!!

Well, Not as big of a load as you guys got......But i dont got no side boards on this truck :)

There is a gel cell battery the same size as the 6tl, I think it is Odyssey? dont recall if that is the correct name but i looked at them when i was buying 6tl's for my truck, I think the gel cell 6tl's were about $400. apiece!http://www.batteriesplus.com/pc-35544-35544-PC2250ST-H.aspx...

RE: Re: Axle cork & Hub flip Well you can buy a whole sheet of rubberized cork from Mcmaster=carr for 13 dollars and that is enough to make about a thousand inserts. I know thats what i did and i have no worries about leaks.

kublos surplus has them for $225 + shipping, I belive they are military rebuild's . I have one that the bracket was cracked and then broke, I fixed it with JB Weld , Still holding! I have one that has a bad armature but the case is good.

Did you try TNJ Murry?

when i pulled my new horn wire through, i attach the new wire to the old wire and as i pulled the old wire out it pulled the new wire in! It is much easier this way and your done with the job in 15 minutes!

I run mine all over the place, and since i run it on waste ATF it is cheap to drive!! Yeah i went to trenton to get my plates, took longer to find a place to park, than it did to get the plates!