Search results

Thanks doghead :beer: I rerouted the postive cable through the hole in the frame rail and now the cable no longer comes even close to the drive shaft or hang down.

Re: RE: Purist :ditto: Plus my other vehicles use GL5, so I do not have to keep (2) types of GO stashed in my already stuffed shop.

doghead - Thanks for the info. FWIW - The battery cable going to the starter is routed between the top if the frame rail and the bottom of the cab. There is a 1" + hole in the frame rail with a grommet that is open and I am wondering if the battery cable is supposed to go through that hole? I...

I bought my handles from these guys for less than $10.00 per handle..The handles are listed under the cab lock handles section: http://www.lowcosttrailersupplies.com/Merchant3/merchant.mvc?page=LCTS/CTGY/K03x5

Thie past weekend I was PMing my M35A2 and while I was greasing chassis I noticed the the positive battery cable that goes to the starter motor is just inches from the front driveshaft when the battery box is in the stowed postion. Can someone tell me the proper route for the battery cable...

When securing my truck I do the following: Disconnect negative battery cable. Lock battery compartment with pad lock. Attach the club to the steering wheel. Lock cab with locking door handles. - I drilled a hole in the battery compartment door for a pad lock, just like the one in tool...

Just call me Harry then :D [thumbzup]

dabtl - I bought a set of spin-on adapters from jatonka too, but I have not installed mine yet. Did paint the adapters before you installed them?

I was thinking about a Cummins 6CT 8.3 if/when my LDT ever dies.

Your truck looks great! I have never seen a deuce front bumper with the taper on the ends before did you modify it? Also, what size tires are you running?

That is a sweet looking machine! [thumbzup] [thumbzup] [thumbzup]

The M35 looks great and I like the Jeep too [thumbzup] [thumbzup]

Take a look at the pic below....

Re: RE: Re: Front winch install progress..slow, but moving a That is good to know Recovry4X4....Thanks! No, I do not have the shouldered bolts yet.

Looking good!!!!! [thumbzup] [thumbzup] [thumbzup]

Hey bigmike - How's it going? I got the 4th bracket from Saturn Surplus and I will more than likely pull the bumper to install the winch, but I do not think it is absolutely necessary. I just figured it might be easier to install the winch drive shaft with the bumper removed, but I will try to...

Well - I made a some progress installing the frame extensions, winch brackets and remounting the bumper. I probably will not get the winch installed until I go through it this winter. Besides after reading some of the posts on this fine site, I think will install the winch drive shaft before I...

Thank you for the confirmation Kenny! [thumbzup]

I thought that the angle bracket that holds the brush guard required and additional washer under the rear most bolt hole that fastens the angle bracket to the frame. Is this not the case? Thanks, C. D. Hunter

Thank you for the replies gentlemen! :beer: