Search results

Im having an issue with some 24 v LED headlights. the drivers side works fine on HIs and LOs but the other one wont turn on at all. I also swapped out the marker lights that had the ground on them. These just have a little metal ring on one of the screw holes and I'm not sure how that would...

So I need to get both? I would guess the flange one goes in the fording exhaust?

I’m installing a fording exhaust and I’m having an issue with what gasket to use. When I look it up sometimes it says flange. Other times it says donut. Which is the right one? Any help would be appreciated.

Will it make it ride smoother and less noisy? Not possible. lol

This has to be one of those "Why the hell did they design it like this" parts. They could have made the knobs twist off but noooooo.

I checked out the map. There are a few right near my house that still refused to do it.

I was also told to not bother balancing the tires since i only go 50 mph. 3-speed.

I tried discount tire. They said they couldn’t close the hood on the balancing machine.

I'm having trouble finding a place that can mount stock tires on the stock rims. They all say that their machine isn't big enough to balance them. Any suggestions where to take them to get this done?

it’s going over heat and sound insulation. I’m mounting the sub and amp on it.

I'm going to be putting a piece of 3/4 in plywood down on the tunnel to help with the sound insulation. I'm going to use self tapping screws. Before I make any colossal mistakes what is the clearance under the tunnel? I know the fuel tank is under there and I don't want to puncture it.

Whats it mean if it only does the quick flash once in a while?

My M998 is so loud I cant hear myself talk to myself.

Is there a better set up than the round knob for the hard door latch? I keep slashing my knuckles when I open my door from the inside.

I purchased these from Midwest. The only headache was putting the windows in but other than that i think it was a good buy. https://midwestmilitaryequipment.com/1-4-aluminum-hard-door-kit-for-hmmwv-humvee/

I’ve seen some pics of engines that have 2 fans mounted on the radiator. Is that for an AC unit or is that to help cool? If it is to help cool does it work well?

When i drive it it hovers at 220. When I stop I always check to see if I see any coolant puddles under it from the boil over but so far nothing.

My guess is it’s from the lowest bidder.

I have a question about temperature. I have a 1987 M998. It runs around 220 degrees. Some people I've talked to say that that's fine because the older ones ran hot. Some people say that I'm going to blow the head gasket. The gauge is accurate. I did an infrared temp at the thermostat. Any...

How much? Mine dance a lot.