Search results

I have a # on my weight and dimension plate that says 323989 the glove box has a USMC sticker. So assuming that this was a us marine core truck does that sound like a USMC serial #?

Where do you find the frame #'s? M35's have them on the drivers frame about the front leafspring mount. My M54A2 has a giant bracket for the steering linkage there. Is it behind it?

I bought NAPA GL1 90WT for the trans and transfer case. Is all GL1 fluids safe for yellow metal? Or only certain ones?

https://www.napaonline.com/en/p/NHF65201 For the Trans? Does the transfer case have yellow metal?

What fluids would you guys recommend for my 5 ton? I am changing all 3 differentials, the transfer case, and the transmission fluids. What is recommended? What types and what Viscosities? LO 9-2320-211-12 Shows 80/90 for everything. But I know

Sorry I didn't get notification of any replies... That is in fact a soft line. It's DOT approved Braided stainless brake lines.

Won a Gov Planet auction and now the 5 ton has new shoes.

I have no idea. I can't even find the frame #'s.

Just had my lines remade. I've rebuilt the master cylinder, rebuilt the airpack, flushed everything with denatured alcohol, replaced all the wheel cylinders, now I'm replacing all the brake lines. The place I had make the lines has ordered in everything to make cunnifer lines to replace the hard...

So what I found is that the fuel pump had died and popped the fuse. I installed a new fuel pump I bought from Eastern Surplus. Measured that I had 24v at the pump housing but the fuel pump still wouldn't pump. With the fuel pump plugged in, the voltage drops to 0. I found the factory...

The 33511 is the filter that replaces the reusable Facet filter.

Where can I find the identification numbers on my M54A2. I have struggled to find them The dash plate is not the original, I know it's not a 89 like the title says. That was just the year it was overhauled. Are there identifying numbers anywhere else on the frame or anywhere?

Previous 2 owners did near 0 maintenance on the cooling system of my M54A2. I replaced the waterpump, had the radiator rodded, replaced every hose, replaced the thermostat, replaced the headgaskets, had the heads resurfaces 7 thousandths, changed the oil, filled with new sca global coolant...

This is the bulkhead branch tee that goes in the middle upper part of the firewall on my M54A2 it also connects to the pressure regulator on the firewall and I cant for the life of me find the thread size on the line sides. I know the center is 1/4" mpt. I beleive the other sides are 3/8...

So mysteriously out of nowhere my in tank fuel pump stopped working. The fuse was blown, so I installed another fuse and tested to make sure I had 24v to the wiring and I did, but fuel pump wouldn't work. I ordered a new pump for $575 from eastern surplus, installed it and same problem. I...

Ok, I've figured out that there are 3 fuel filters on this truck. I ordered wix 33512 filters for the filter housing on the engine, but I have a 3rd filter housing on the drivers frame rail in the wheel well that is a Facet 053754-02. is the 33511 filter the replacement for this facet filter?

BTW Serck Radiator 424 E Baseline Rd Mesa, AZ 85204 (480) 926-3555 They did a great job and only charged $175 to rod, flush, clean, and paint the radiator.

So, turns out the cooling system on this truck had been neglected by the previous owners. The radiator shop told me they vatted and flushed the radiator 3 times and it was still 70% plugged. So they rodded it and repairing a little tiny hole in a tube and now it took all the coolant just fine.

I've looked thru the spreadsheet but not sure if the fuel filter listed is correct for a M54A2 as it doesn't specify. I need to replace my filter and check my fuel pump, as the 15A fuse in the pump cover was blown. If anyone knows it would be greatly appreciated.