Search results

My apologies for the late response, I’ve got a Big move ahead of me including the MEP 804B that’s now has become a hobby I’m going to stop for 2 to 3 weeks to settle in! Thank You guy’s so much for your help! God willing we can start again in a few weeks.

R 14 T2 Also no voltage.

Good afternoon or evening, R14 T1 to ground stud has no voltage at start up.

Sounds good Thank you!

Im an idiot! I was on R1. CR4 T1 has 24v on start. CR4 T2 has 24v on start.

CR 4 has 24 Volts on T1 &T2 with or without S1 in START position, it gets 24 volt in AUX fuel position.

Hello, again TB6-8 has 3 wires on it and has 24 volts

I'm rained out will have to try again another day Thank You guys

I'm screwed up I checked CR4 T1 to T2 that's why I don't have voltage just tested it again and it has 24V CR4 T1 to ground and T2 to ground. I'll keep going and give you a heads up Thanks

S1-7 was 24V

That was easy enough CR4 T1 & T2 no voltage what size diode is this? I'll have to replace it, I do have a variety of diodes I'm not to good with the solder gun maybe I can crimp it? Thank you for helping me out that's a strat. Guy I know what it's like with the little one's. Were in FL and the...

Thank you, I'll go thru your steps and keep you guys posted

Plastic.

No voltage at startup between F and J

Terminal 1 & 3 at start up is 0 volt on VR

Excuse me for being so ignorant to the forums. I checked A1 terminal 7 & 8 at startup read 1 volt, terminal 5 & 6 = 5v with motor running. please advice Thank You

Quad fuse is installed and provides power to A1, I did a test for the AC voltage regulator per TM 9-6115-643-24 ( 4-1.1 ) h, has between 4 and 12 VDC J, terminal 10 and 11 of AC voltage regulator does not indicate 210 to 280 VAC i, does read 3000 ohms. Statement m is got me confused (easy to...

Good morning. When I installed A1 EBAY open box I installed the A1 fuse generator started although there was no power I checked the A1 fuse and it was good, I’ll go through schematic 5.2 troubleshooting to see if it’s a bad voltage regulator! I’ll keep you guys posted Thank You for the HELP! ps...