Search results

Ok guys Im looking at a Denso style compressor for a Cat. I can buy the adapter for the AC lines. Not sure of the rotation yet but will find out for sure today. It looks like a I can only use one pulley groove on the inside because the outer is smaller. I can fit it on either side of the engine...

Ok guys Ive been researching here and online about this A/C. I am wonderimg if the Red Dot Humvee compressor will work can I get it in a double groove pulley configuration, or swap to the correct pulley? I am going to mount the the 3 fan evaporator in the video on the roof of my shelter box or...

The Ouverson hubs are the most rugged and USA made and real customer service. You will break an axle shaft before you break them.

Ok gous I just got a nos A/C unit and the evaporator and some A/C lines. I did some reading on here to try to find some help with the install. I will need to source a compressor and make or find brackets for it. Here a video. https://youtu.be/3KXav60ijL8

I just wanted to give a big Thank you to Floridianson &vmy daughter got a great deal on a soft top and frame from him and my daughter helped navigate and both helped put the top on as it started to rain. Again Thank you both.

Heres another update video on the hardtop build finally got the truck painted enjoy. https://youtu.be/cgfvre_vXrg

I ll try to get the video up today for everyone between all the rain and heat just been a real pain to get anything done.

Ok fellas I took her out for a spin to pick up my daughter couldnt get video top was off and trying to beat the rain. I noticed the engine seemed quieter less throttle needed especially in 4th on a hill in 5th gear egts stayed at 1045 F wouldnt go no higher. I did notice the exhaust sound...

Its is after the turbo on the intake elbow the water will eat up the turbo fins if its preturbo.

Yes I am going to put a shut off valve in as well this just the testing phase I did place the hose on top to try to prevent syphoning but will be adding one. I read a lot of threads on here including that one. I was very concerned as well in that regard.

Heres the other video https://youtu.be/NlTSunDNtSE I will have a driving video up hopefully this evening take care guys.

Ok guys I have been doing a lot of research and parts gathering for this setup. Heres what I have set up and the parts list. Aubrins Multimeter SYL-1813R-24 24v version,Ogrmar SSR-40DD 40A DC3-32V DC5-200V Solid State Relay with heat sink K type Thermo couple 800 Degrees C 3 meter cable, Good...

Thank you so much it is #24 That was a huge help. I can now get things going with my project. I ll start a thread soon on it have a great day.

The reason Im asking is the flame heater fittings are metric at least some of them from what i read. So just want to be certain.

Its fine thread the fitting off the small hose from flame heater fits it.

Trying to find the size of the hole n threads on the small on top of the intake elbow. This fitting fits it .thanks guys

Ya I want to coat them its been raining non stop here so not been able to get them done.

Happy Memorial Day everyone heres amother update on the build. https://youtu.be/YoseNBe6n4A

Im either going to fab some folding steps or buy a bording ladder.

Well guys if they want sell stuff individually like that and over price it vote with your dollars and let it sit. They'll come around or it 'll sit and rot. Then on to another contractor if they can't move product for the government.