Search results

my deuce is hard to start and when it does it oscillates between 450 rpm and 1200 rpm with my foot off the pedal--it has been sitting for 3 years as a no start truck--i replaced the injector hh since the orginal hh had a stuck center valve--with the new hh the truck starts up but only holds...

M35a2 engine turns over but will not start--fuel is getting to the injector pump but not out of the pump--there is no fuel entering the injector lines with the lines disconected at the injectors--engine does run for a few seconds with a shot of either--pump in the tank does work--what are the...

hI--WILL THE M931A2 WHEELS AND TIRES FIT A M818 TRACTOR--THANKS GEORGE

I removed the intake and exaust manifolds from my m151a1 that has been stored inside since I bought it in 1982 at a base in NJ--I noticed the intake valve stems were carboned up and loaded with sludge--I rembered at Harbor Freight they had a small top loading sand blasting gun for sale and they...

The jeep I am working on is an M718 ambulance and I have to replace all the brake wheel cylinders----the front wheel cylinders are 3/4 inch and the rears are 1 inch --I understand the m151a2 has 1 inch wheel cylinders in the front and 3/4 inch in the rear--would I be better off using the A2...

who sells the axel chain clamps that attach to the medium tow bar--thanks

I am putting my 1968 m151a1 back together after letting it sit stored inside for 30 years--i would like to go with a mechanical fuel pump and will use a good a2 tank i have--does anyone know a fuel pump model number that would fit--napa has a large assortment but i cannot figure it out--looks...

My M818 has 48k miles--starts fast--idles at 625 rpm--comes up to running temp--it has low power and is very slow getting up to 50mph. It has what sounds like a fuel knock all the way up to 45mph--Over 45mph the noise goes away and the engine sounds OK--The noise comes back as soon as I go under...

I have a frozen throw out bearing in a deuce--How many hours should this job take to replace the bearing --the clutch looks new--Thanks

The Deuce is for a collecter in Florida and the 818 is going to a logger in GA--Wonder what the 818 will look like in a year??

GL seems to act as a big Used Car Dealer--GL takes possession of all property before it is sold--GL uses its own website to sell the property--GL issues receipts using GL as the seller--If you need a title GL washes the vehicle form 97 into a Florida title--GL has its name on the title as the...

I had a dry master cylinder--i filled it with fluid and bled the system from the power brake booster--the pedal came up but is hard as a rock--only goes down 1/2 inch and then seems to push up against my foot--there is almost no breaking--does anyone have any ideas--thanks george

I just sold two good trucks to members in SC off EBAY--The trucker came on a wet day and had alot of fun loading on a slippery deck--The 818 was loaded against the shop equiptment on the front--He did a good job getting everything to SC the next day--Good luck with your truck Cam--

I purchased five 818s through GL in New Jersey--the trucks sat for 2-3 years at the yard waiting for sale--the trucks all started with jumps but idled from 650 rpm on one and 900--1200 rpm for the others--when shifting these trucks the rpms stay around 1200 rpm and the rpm drop from 2000 to 1200...

With the transfer case in netural how far and how fast can the vehical be towed--can the front axel be off the ground during the tow or will that wreck the transfer case--Thanks

Hi--Just purchased a cucv pick up--Starts fast and runs well but has a small rod knock--The place I got it said they used starting fluid on it --Is the small rod knock normal or should I change the rod bearing--How hard is it to remove the oil pan--Thanks George

In what year did AM General start building M998s and were the 1985s actually built in 1984--Is there a plate with the actual build date on the vehicle--Having trouble with motor vehicle--They always look to deep--Thanks George

My 1970 Deuce has a vibration that starts around 36 MPH. The vibration pulses from mild to almost nothing all the way to max speed--Less vibration at 50mph+--It fells like the passengers side is where the vibration is coming from--I rotated out the right front tire for a new one and still have...

I just picked up an m109a3 in NJ--All purchased and on sale vehicles are moved to a secure area for pick-up and inspections--That made things easy--I jumped the truck and after the fourth crank it started--missed and smoked until I hit the highway and then cleared up--I ran home at 2200 rpm--The...

I have a 1971 M35a2 with an engine rebuild date of 1989--The mains are .010 over--37000 miles--It has a c- turbo and runs fine--There is blow by coming out of the hose hanging down the passengers side of the engine and out of the oil fill hole when the cap is removed--How much blow by is...