• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. EO2NMCB

    Mep 002, Mep003 vs civ genset?

    Been looking for a mep 002 or mep 003, bid 500.00 on a couple that were on m116 trailer in past gl auction. They went a little over 1k, both were missing the fuel tank. In searching the posts it seems that parts are hard to come by for the mil genset. That being said, wife says just buy a civ...
  2. EO2NMCB

    CUCV II or the LSSV parts manual

    http://www.gmfleet.com/pdf/01-02LSSVPM_Pickup.pdf Found this while surfing, a few of the part numbers are the same as the cucv.
  3. EO2NMCB

    Chicago to st. louis

    Just looking to move a set of cucv troop seats from Chicago, IL to St. Louis.
  4. EO2NMCB

    Can 6.5 heads be swaped onto a 6.2

    Ok blown head gasket, and the head is craked between the valves on all cyl's. Have a lead on a 6.5 with a bad bottom end, but good top end. Can 6.5 heads be swaped onto a 6.2 like ya can do with 360 heads on a 318?
  5. EO2NMCB

    Compression coming back thru intake

    Been using the TM-34, also did a search, but did not find much. When the truck was running it sounded like compression coming back thru the intake. Also alot of blue smoke out of the even cycls. Pulled the intake and vavle covers, all valves moving, push rod and rockers arm look good. When...
  6. EO2NMCB

    GL %^#^&&*

    First off let me state that I did not preview the truck. From the pics the truck looks great and it is a rust free truck {must have went to the wash rack everyday}. But what burns my butt is right there on the windsheild is the write up from the turn in. Knock in engine, of course that is no...
  7. EO2NMCB

    Any one parting out a blazer?

    I'm looking for a manual window regulator for the tailgate and crank hand. Mine was missing the tailgate from GL and put a civ one on. The motor on it was bad, just want to go with the org setup. I know LMC has them for 119.00, sorry I'm just cheap! Would also take a jack assy. Thanks Charlie
  8. EO2NMCB

    cucv from GL no start

    Bought the m1009 from gl and have been unable to get it started. I installed a manual GP switch, have power at the plugs, but didn't have time to ohmn them out. Have read the troubleshooting in the TM 20 and 34 and did a search here on SS, not sure what I'm missing. Lift pump is good and fuel...
  9. EO2NMCB

    Fair price on a parts m1009

    Found a parts m1009 close by, what is a fair price? I'm guessing the motor is blown. Sorry no pics. here is the sellers reply LOL.............................................................. " i have no clue about the engine. most all of the military trucks have the engines removed. i think...
  10. EO2NMCB

    No glow plug control card

    84 m1009 cranks fine, it is missing the glow plug control card and will not start. I thought I might get lucky with temp's in the mid 90's that it might start with out the glow plugs. I will order a card this week from front line. Is there any chance that it will start with no control card...
  11. EO2NMCB

    M1009 tailgate

    The tailgate on the m1009 I bought from GL was MIA. Have a civ tailgate with the power window regulator, can the power regulator be swaped out with a manual one? Also it is missing the hinges, anyone know of a good place to find a set other than a junk yard? Thanks in advance
  12. EO2NMCB

    M35A1 or A2?

    Well never thought about it before, but after reading many post is my truck a A1 or A2? The reason I ask is that the truck has no stack, it has the hoz exhaust that runs under the bed. Dad bought it from DRMO in 2000, Data plates state M35A2C WO/W , it does have the drop sides. Built under a...
Top