Search results

Somebody was messing with the fuel pumps, looks like 1 and 2 had shims added. I went and pulled the injectors and took them apart. 3 out of 4 were pretty rusty inside. Getting to the point where I’m just gonna junk this whole damn thing, who knows what else is wrong with it. so much for the...

yes I did, it compresses by hand and fuel comes out. Looking at it more, it seems like there’s too many shims for this pump. I’m gonna take #1 pump off tomorrow and measure those shims. what’s The best way to get the pin aligned on the pump with the fuel rack when putting it back in ? I’m...

Hey guys pump number 2 won’t produce any fuel while cranking with the line off. Looking through the engine tm, on 3-23, it says to shim the pump. Never done this before, anybody have any experience with this procedure ? Thanks for any help in advance

No never seen it work like it should. With a bunch of the cable ties cut, it makes me think that somebody was in here trying to fix it before but gave up.

Thanks to kloppk, problems been solved. Ended up being a reverse wire on the battle short switch. Flipped both around and K1 works like it should. The S7- 5 and 8 contacts were backwards. Thanks again to kloppk. Guy knows his stuff.

Also Does the S5 switch close a ground ?

Hey guys, got a 831-a, and having a problem with the a/c contractor (k1). My problem is basically the switch on the front (S5) won’t engage the relay (k1). I know k1 is good, I pulled it out and energized it with 24 and the relay clicks and has continuity. I pulled out S5 too, tested ok. If I...