Search results

When changing out the secondary fuel filters and cleaning the canisters, the following came out of the drain cock at the bottom of one of them. It is a tiny/small steel collar ring of some sort. Anyone recognize what this is? I'm not sure if it lined the drain hole or not. When I replaced...

I have a 68 Kaiser M35A2. Tried getting moving today out of the mud/snow. It appears that the front axle is not engaging. Rear wheels just spin in the mud and it doesn't seem like front wheels are engaged at all. Isn't this supposed to be all wheel drive all the time? There is a drive shaft...

Anyone know where I can get just the metal corner brackets that connect the upright wood posts to the top bow? I have several that are rusted through, split and the screws are so rusted they were destroyed trying to get them off. I can salvage the wood for the most part, the brackets however...

I'm pretty sure the alternator on my deuce crashed. I noticed the volt guage reading at the yellow/green line, then when starting the truck the guage went all the way left. Now its in the yellow. Put a meter on the batteries, they are 24 volt. When turn the power to the guages on, voltage...

When the air copressor is not running, the belts are tight and rotate normally/smooth. When the air compressor kicks on, the belt that drives the compressor starts jumping around as if it is loose. It doesn't jump off the pulley or anything, the belts flex and jump in the center between the...

I checked the archives on this topic and found a few ideas from back in April, wondering if there are any new ideas. I have a soft top in decent condition, however the front sewn edge at the windshield has come apart and the plastic channel piece that secures the top and goes in the windshield...

Anyone know where I can get the small clips that the screws on the dash guage panel secure to? Looks like the screws have a t-handle on the end of them which when turned right/left into this clip snugs the panel corner up. :roll: