• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. K

    Mercedes-Benz 1017A 1985

    I have a Unimog and I know there are some Mercedes truck dealers in the US I would make a phone call to one of them and ask your questions and if they are willing to help I would buy my parts from them, its not like your never going to need anymore parts!
  2. K

    Cab install, no crane/lift

    crazyguy your title sounds like the start of a very bad story! Think this through and get some help, I dont want your next post to be the REST of that bad story!
  3. K

    Ugh i rolled her!

    I am glad your OK after that and I totally agree with the other comments its just a vehicle and it can be repaired with a little effort, the important piece made out out OK!!!
  4. K

    M931A1 Recovery Shreveport, LA to Hannibal, MO on 2021-03-26

    Congrats on the new truck the 939 series are very nice easy to drive trucks and the noise in the cab is seriously about 1/4 the noise in a Deuce cab. Like was said check ALL the fluids and lubes make sure that you have a jack capable of lifting what needs lifting and DUCT tape its a rag top...
  5. K

    Using a pallet jack to install/remove super singles

    I used a pallet jack when mounting the tires 1600 20 on my M920 and I had myself and a helper and it worked terrific but I can see having a second person to stabilize the tire was very helpful!
  6. K

    The Green Croc.... My monster KrAZ-255B1

    Congrats on the 255 it is and always has been one of my favorite trucks and I have NEVER seen one in the US! SAD!
  7. K

    Some welding trucks for your perusal

    Very nice fabrication and the layout is of your tools looks so very organized and accessible , a whole lot of thought went into your planning!! I have 1 question on the hummer welding setup, how does the hummer handle the load I mean from a power standpoint? Most all the hummers I have ever...
  8. K

    Off to a good start, I think

    Rick I think most of us would agree here THAT is a phenomenal start! You got one heck of a lot done to the old girl, good looking truck and your definately giving it a completely NEW life not to mention good looking fabrication work, over all I would say WELL DONE!!!! Karl
  9. K

    5 ton owner...finally

    Congrats on the 5 ton the 939 series are great trucks especially with the 855 series non-turbo engine, simple to work on very reliable as long as the maintenance is up to date! I know there is a placard in the truck but remember NOT to use low range in reverse or you will very possibly find out...
  10. K

    New Purchase Globe 10 ton trailer

    I have no idea what you paid but it sure looks like a dandy of a trailer! With the empty weight of the trailer at 12K I would sure give the brakes a good looking at and testing it wont take long to un-cage them and IF you needed them you would sure be glad you took the time! Beautiful trailer...
  11. K

    Bought myself a project! 1997 M1081

    Sean congrats on the truck it looks like you have a good solid base to start on! As far as the historical side of the Deuce yes you are right but on the other hand you have a lot more user friendly versatile vehicle here and the parts needed to repair are going to much more common while you are...
  12. K

    CA Hagerty Alternatives?

    I would be tempted to look for a different carrier! Since they insured the truck before they do know what it is correct? Is this a CA thing, or just this carrier? There are thousands of trucks sitting around CA not in garages I wonder what makes your Deuce so different and obviously...
  13. K

    The "THING" is here.

    GREAT score!!! Two totally different and beautiful vehicles very well done!!!
  14. K

    LMTV pulls an Unimog out

    There is nothing more a Unimog owner hates more than having to get pulled out, on the other hand after you get over the embarrassment factor it feels pretty darn good to be mobile again! Thats a darned nice looking 1088 and the S280 looks perfectly at home in the bed!! Good pull and in case...
  15. K

    New Deuce Owner in SoCal

    Congrats on the new purchase these are great trucks to cut your teeth on pretty straight forward in almost all ways! You can down load the TMs on this site and that would be the first place I would look at when getting into your wiring issues its all fairly easy when you see it all in one...
  16. K

    My "Motor Home"

    You said a "SOLAR POWERED MOTORHOME" Its still got a regular diesel engine in it?
  17. K

    Making a deuce a reliable daily driver? Help make a to-do list?

    This may have been asked or you may have already addressed it but are you going to put a shelter on the truck or are you going to build something? The S280 shelter is a very good unit and big enough that you can do a lot with it. Take your time and find one in very good condition my guess is...
  18. K

    The Once And For All On Batteries...

    One thing to remember contracts like for batteries generally go to the lowest bidder who can meet the requirements specified. What does this mean to you is that you can put any decent quality battery in your truck and it will work fine, as you have already proven! The Military generally puts 4...
  19. K

    Snow Handling

    If you mounted a blade on the front of your hummer and its a real steel blade you just added about 600 pounds to your front end, thats GOOD! If you are running stock hummer military tires thats BAD they are to wide and spread your weight over to large an area to get decent traction. I think...
  20. K

    What batteties are recomended for use in the 5 tons and deuces?

    Remember depending on what you need for starting in YOUR climate you can get by very easily with only two batteries in the 5 ton!
Top