Search results

I need help storing the M1010 coming back from alaska it seems that it broke a rod so we need to storage it until i can come and get it 305-218-0640 willie any help will be great

Well i finally finish on time to give it to bob which will be driving it to Alaska on the AlCAN HWY convoy, is being about 8 months of work and mods from engine transmission and rear end work , interior and living quaters in the back with a suport trailer, everythings is new and is going with a...

Ok so we know i being working on a M1010 wich is schedule to make the ALCAN HWY convoy , finaly got the A/C working here is a rundown on parts and cost.. A/C compressor new $200 Condenser and Hoses $180 A/C unit and dryer $150] Relay and plug for Compressor $10 Cab hoses and vaccum charge with...

Well after 6 month is finally running, took a stock M1010 that was converter to 12 V and put a 96 6.5 turbo that i rebuild with new Heads and install a 4911 IP and new injectors had the 4L80E rebuild with new TQ conveter and install a new US shift optishift auxiliry oil cooler and tranny cooler...

Does any one know what sizes is the GM14 bolt on a M1008 is it a 10.5 or 11.5 did a search and read a few post but no one talks about the ring sizes thank you:)

Ok so i told my self no more gagets in the M1009, wrong, being kiking around putting electric fan on the cucv and a tack, so finally i did it a few weeks ago, i use the electric fans that come on the red dot A/C kits from the HMMWV from the condenser, all i had to do was trim 1/2 inch from both...

So i being working on this engine for a few months for the M1010 it started as a 96 6.5 electronic, so i rebuild the complete motor including new cylender heads as the old ones where crack, got a 92 IP 4911 had it rebuild and ran on the stant turn the fuel up a little, also had the injectors...

So i being working on our M1010 AC12 HWY convoy between jobs , install digital gauges for boost ,oil Pressure, water temps and volts i choose digital because where easy to fit in the warning light places , even do they are on , there are not connected to the sensors, also go a A/C volts for the...

Well everithing its out of the HULL persaid, so we started degreesing and hitting it with 3000LB preasure cleaner, trying to get it ready for sandblast the interior so we can start planing on repower, lots of work ahead as well planing here are some pictures...

well we finally got to remove the engines of the M5 , still got lots of work ahead, but finally they are out, here are some pictures

Well is being a few months sice i painted the HMMWV , i being putting it together little by little and it was nice weather here friday so took it out to a local car show that we usually have a few military vehicles, here are some pictures:-D

Well being working on removing the turretof the M5 for the lastfew weeks, not only is being raining on weekends here but also had to cut all the heads od the blocks that clamp the turret down, today me and the crew remove , i cut the remaining 3 clamping bolts, i remove a lot stuff inside the...

Well we have being discusting moving the M5 from storage to the workshop to start working on some type of retoration or at least take it apart then go from there,needs a lot of work but we need to start on it, well we chose the M52A2 tractor and sure did the job well , we had to move lots of...

Ok so my 85 M1009 hit 50000 miles yesterday i got with 27000 almost a year ago is a DD i put in average 500 miles a week city and HWY. i get 18-21 MPG i enjoy driving it every day rain or shine never let me down , done many things to it and have more in the future but for now here is a list of...

Ok maybe some one can give me advise , we painted the HMMWV using AERVOE 990 green , we use the primer recomended and the paint to thinner ratio, for most looks good but the some areas look dusty i think thats the best way to explain it, i contacted AERVOE and they said amybe its to warm here ...

Today i took my HMMWV along with my friend M35A3 to set for a comercial for italian sun glasses, all the trucks did was sit at the set while the fim some type of crime seen,ted from 06:30 to about 15:00 with full breakfast and lunch plus snacks all day long amazing how many people takes to make...

Well on my way back fom the ge together in OPOPKA i hear a noise and the wheel pull hard t the rigth, got offthe HWY and jack it up and did not see anythng loose , i touch both hubbs with my handsand you could keep your palm on them , so drove the rest of the way home anout 8 miles slow on city...

Well finally got to install a factory style rug in my 1009 with insulation , i got the rug on friday it saids to take it out the box and let it sit for 72hrs, well i wich i had that munch time wated to do it this mornig , started by removing all the seats and clean the metal floor follow by...

Does anybody know where i can get a new vaccum selenoid , at least thas what i call it, goes on the injection pump on the passanger side that hooks up to the vacuum pump then it works is way down the trany to help with the shifting thanks....

My brother won 2 trailers at red arsenal base in alabama, his EUC just clear which give us very little time for logistics, is anybody near the base that has room to store then so we clan plan this pick up to miami with more time, my brother is a pilot so we can fligth and probably rent a truck...