Search results

Hi Thinking of getting a military speaker for my CB radio for the military look. Does anyone know what the impedance of the speaker is inside or will I have to switch out the speaker. Thanks for the help. Ken

Hi My soft door windows have scratches and white spots and I wonder if anyone has suggestions on cleaning/polishing these. Thanks for the help. Ken

Hi Has anyone added a spotlight to their rearview mirror frame? Thanks Ken

Hi Can someone tell me what the torque for the oil drain plug? Thanks Ken:grin:

cwajciec Thanks for the help. I will try this. Ken

Hi Yes I don't have a tread depth gage but I am using a machinist ruler and I know that the rear tires were about 90% when I put them on and that was only about 3000 miles ago. I have 30 PSI in the tires. Some have talked about wheel alignment. I am new to the Humvee and is it because of the...

Hi The tires are radials and the wear is mostly on the center. I don't have a tread depth gage but the fronts are about 1/2" deep and the two rear are 5/16" on the right and 3/16" on the left. When I got her the rear left was also the most worn. Ken

Hi I got my Humvee about 8 months ago and I knew the rear tires were getting down there and so I got 2 tires off of Ebay that were at about 85% tread. I have only had them on about 3,000 miles and the rear tires are less then 40%. Has anyone had this problem? Thanks Ken

86humv I think I got it right. Sent two to you. Ken

Hi The problem I have with the stock horn is I can't even hear it when I'm on the road. Ken

Hi Need to replace the stock horn and wonder what some have come up with as a good horn to use. Ken

86humv No mail yet. Ken

86humv How much are you looking for it. Ken

86humv Did you say that you have a tach that would work? If so how much would you want for one? Ken

86humv Hi again. Did you mean the sending unit? Ken

86humv Sorry I'm confused. Are you saying That the 3k tach works with my sender? Ken

86humv 5-d1-03500-rpm-24-BA-0-0. Ken

86humv I agree. The tach is new and this is the third sender. I wish I could test the tach. Also I wish I knew if I should read some sort of output from the sender. Ken

86humv Hi, This is how I have it wired. Ken

86humv Hi, I installed another sender and still no luck. The tach that I have is the 0-3500rpm model with a 4 wire terminal strip. The sender P/N is 6680-01-148-8875. I'm not sure if this is the right sender. They said it was for the Humvee. When I turn the ignition switch to the "Run" position...