Search results

The truck probably has silicone brake fluid in it. You need to confirm before you add DOT 3 as they are not supposed to mix. There has been much debate on site on this subject and some people says it is OK to mix but most don't. If you can get a little out pour some water in it and if it does...

Good for you, and Mathew also to be so fortunate.

The M813 I live in at the Ga Rally was a GSA vehicle. It had not been picked up by any agency probably because it would not start. Thats the first thing I was told when I went to pick it up, that many had tried and it just would not start. Installed batterys, raised hood and reset emergency...

Andy, I just looked at the pictures. Bob had a peanut boil party tonight with all the boiled peanuts, beer, or whisky you could consume and I am in no condition to reply. Much the same as you were last night when you left my house after partaking of my cheap whiskey.

Have fun Guys, wish I were there with you.

Well yea, there you go, my flywheels were bolted on and the carbs were included. There appeared to be water damage half way up the engine but no internal damage. Bad news is high bid could get all three. My bid was $203.00, and yes, I got all three. And then The guy delivered to my farm...

Remember Andy I have a parts engine I bought that ran great when pulled, or so I was told. When I went to pick it up it had sank about six inches into the ground. Trans was full of water and junk but no water in the engine. I bet the cam and lifters are good. Then I have the engine I pulled...

Rick is probably right Andy. If the cam lobe is wiped which means worn down then it won'r raise the lifter enough to open the valve. If you can turn the engine and see if that lifter rises as much as the others. If not then the cam is bad. If so and if you want I have a parts engine we can...

Did not get PM. My box was full several days ago and I cleaned it up. Send again.

Then there was this years Peanut Festival.

I used my M813 to haul all the old Vets in the Brooklet Peanut Festival Parade. I also used my M151 to pickup Santa Clause and deliver him to downtown Brooklet for the lighting of the Christmas Tree. Santa was one of my High School Teachers and a past State Commander of the national Guard. He...

We are loaded and ready to pull out. Be there in 3 hours.

Ferro, I will put them in the truck today and will be at DT around 2:00 tomorrow.

Ferro, clarify your needs. I have a brand new internal cap on my M37 and a good rotor. If that is what you need I can bring it up Wednesday. All you need to do is replace.

Run out of water Phil. But these are dry peanuts I am roasting for some of the Yanks. I will boil the Rally peanuts Tuesday.

What,s in the oven right now??????? PEANUTS, anyone want roasted peanuts at the Rally?? How about JW4X4?? Hope I don't burn them.

We are getting down to the short rows and it is getting GOOOOOOOOOOOOOOOD!!!!!!!!

Put me down for the steering wheel puller Kenny.

Yes both sides light up front and rear and don't flash. When I started trouble shooting I found a broken wire in the pigtail coming out of the flasher. Installed another pigtail and lights come on but don't flash. Sorry, did not realize the above post was from the original poster answering...

If anyone has a parts truck I need a good flasher pigtail and turn signal pigtail with wires in good condition.