Search results

Noticed there is another topic describing almost the same problem as me, but in case its not the same cause, here we go: Signalling Right flashes front and rear right signals. Braking does not affect the flashing. Signalling Left flashes left signal on front but both signals on rear...

testtest maybe my subscription ran out :(

I've seen all the topics on this but my connector looks different. What do I need to convert it to the 4 pin flat connector? Thanks Sent from my HTC One M9 using Tapatalk

Looking for ideas on how to do it. Spare is a 37" humvee tire on a 8x6.5 steel rim. I'm bad with weight estimation but I guess its around 80 lbs total. I know I cant mount to the rear fender like on the bronco, ive seen the pictures. Needs to withstand the bumps and bounces of riding on a...

Just finished lifting my M1009. Thought I'd share my experience. Started with pretty much stock truck. Bought: 16.5" rims: 4 matching and 1 spare from craigslist. $100 for the set. 5x Goodyear Wrangler radials 37x12.50x16.5 - Hummer Tires. 100dollarman.com - Picked up locally $600 for the...

Thought I'd post this here to see if anyone wants to make some friends [emoji1] and since I've assembled a nice sized group so far. So date is set to Thursday June 18. Gripy wants to use the side entrance to the park at smokey bear rd. We can meet at the Parker Rd / Ridge Rte Rd. Exit off the...

Recently put in a temp gauge and sensor, replacing the idiot light sensor. Found that my truck runs cold. Temp never goes above 140*F. Even after extended periods of driving around the city. Ambient temp is 60-70s so it's not like it's too cold outside. My brother's 1008 runs around 180F. Is...

Putting a 4.5" rear lift on my 1009 with a 14b axle. The bolts that hold the u joint strap are contacting the end of the driveshaft and preventing it from turning. We are thinking we need to use shims to make the yoke point up a little to solve this issue. I am wondering if anyone has any...

Having trouble finding this piece. Putting new axles under the m1009 and noticed the dust boot was torn up so I need a new one. Cannot for the life of me find one after searching for several days Here's hoping someone has a source

I guess i shoud've just made one consolidated thread, wasn't thinking ahead too much Swapping a 4.56 dana 60 into my m1009. I want 4.10 gearing with a locker. I know to buy the new gears but I am confused with the diff internals. I believe I need a series 3 carrier, however im not sure if it...

Planning to do a 14b swap into a M1009. Have some questions. 14b came from a '84 suburban. Do i need to move the spring perches? 14b has an open diff with 4.10 gears. I would like to keep the gearing but install a locker. Would this be a compatible locker? I am unsure whether I would also need...

Found a few threads on this but still have some questions This is for a second temperature display on the dash in addition to the "idiot light"I think is the overheat light but not sure. I have not seen a part # for a probe into the engine block to read the temperature. I took a guess and...

New to me M1009. According to previous owner it used to be a cop car. Previous owner removed most of the extra cop wiring. Horn does not work. Horn was spliced to a 24v source from the fuse box. This 24v wire was probably attached to some kind of relay (had loose ends under the dash)... not...

http://i755.photobucket.com/albums/xx191/Russm1/Mobile%20Uploads/IMG_20140718_111205.jpg Attached to the engine side of the firewall. The blue wire is maybe a ground? Looks like some kind of relay? Any ideas?