Search results

Don't take a VACATION and leave your MVs in the your yard!!!! Recently went on vaca for ten days , returned to find a friend had attempted to start my M 931A2, He got it started but got scared and couldn't figure out how to shut it down. I had left little fuel in the tanks and opened the...

Have been chasing air leaks for a month. Only stupid question is the one you don't ask. Any one know of a source for the shutter stat O rings thanks s in advance Andy and his bottle of leak tech

I had posted a like thread about the Fifth Wheel hauler I am building, But here are the pics and a blow by blow for the seat installation, First thing out was the passenger seat and BATTERY BOX. I needed a smaller box ,decided to go down to TWO batteries , So I torch wrenched the box to the...

Gents, Ladies. Have a shake and back and fourth shimmy in the front of my 931 A2 , starts about 40 ish , goes away most of the time by 50 /55 makes the steering feel really "LIGHT" , no doubt likely one of three things? 1, bad wheel bearing , HUM. 2, alignment, UMM , 3. or unbalanced tire...

Hey Guys and Gals, looking for some battle hard , butt sore advice, I have a M 931A2 that I am setting it up as toy hauler, Need some direction on a good quality , flip down arm rests, AIR suspension , power adjustable, high backed with head rest, big rig seats, I know it sounds like I already...

Seems to be little buzz on the goat front, Must be the weather, most have no doors and even fewer have a safe heater, ( imagine being the passenger with the NOS goat heater under your seat ) MIne are by and large put up for winter, 7 months long here. Perhaps they will yard up like deer and...

Recently aquired a mg 34/mag 58 gun ring, Its in great shape and complete except for the mount legs. With the cost of M 66 rings continuing to climb and supplies dwindleing I looked at the M g 34 ring as a reasonably priced substitute . I plan a custom install in the factory location, i'll...

So, have to ask, is there anyone out there who has turboed a 923 a1 and if so what were the results EGT , H.P. increases, ect. What parts did you use, was it a intercooled job or a simple intake / exhaust set up with no cooling . thanks

No real need to shout here but, I gotta tell you, A big thanks to this site and the Classifieds section. As some of you know I am usually looking for some really hard to find stuff, and the classified and the Steel Soldiers Site has never let me done, The immense knowledge and accurate memory...

Guys / Gals, I gotta bite, Have looked every where I can think and cant find a definitive CORRECT location for installation of a "decon bottle" on a M109 A3 , not the jerry can style , the small pressurized bottle Where does the TM reccomend mounting it? Thanks in advance for replies , but...

Hey guys and Gals a quick question, wondering what a comfortable sustained speed on the interstate would be in A M-1088 with the cat /Allison drive train . manual says 55 governed, BUT we all know how that works, Is 65 comfortable with say a rolling load of 20 k and what is the best approach...

Hey guys, has any one got a good Moog or equivalent part number for the outer tie rod ends ( at the wheel) for a goat. ball joints, universals , now the tie rod ends , at least I am working towards the end, Thanks Andy

Hey Guys, In a bit of a pickle, managed to source and rebuild a wheel drive shaft for the carrier in my second goat , but, ( there is always a but) after doing disassembly to replace the d=shaft, I find I am in need of a set of ball joints. If any one has a source for ball joints please drop...

Has any one got a good source for Gamma goat seat covers or cab / traile vinyl roofs, Also trailer troop seat assy, left and right. thanks