Search results

I picked up some seats for my crewcab out of lockbourne, OH GL site. I need to get them picked up and shipped to a business address with a fork lift in Kingston NH 03848. Or if anyone is heading through there and eventually to NH. It is a total of 8 seats on 4 pallets. I'm in no rush to...

I'm helping a friend with their newly acquired m936. We've read the TM's I got the rear pto working adjusted and engaged. all the controls work on the boom. The problem is when using left or right rotate it will only go about 10 degrees from center. I don't dee any limiting pins in the TM's...

Back story is I had no intention of bobbing this. I did some climbing over 4-5 foot tall boulders in my back yard and blew out 8 of the 12 Control arm bushings in the rear tandem axle assembly. When I looked at all the work and cost that was involved I decided to just go ahead and Bob it to...

I am almost done bobbing my 5 ton crew cab. I got the leave springs attached to the axle yesterday and took my measurements for my driveshaft. I got a measurement of 76 inches from mounting surface to mounting surface. Is there a magic number with these driveshafts to the Length you can go...

I am bobbing my crew cab right now and I used a set of MRAP springs, in addition to needing a spacer, I need to spin the cans and re-pipe some air lines. I know these brakes can be dangerous, any pictures or advice on how to go about spinning this without hurting myself is appreciated, please...

I have an m817 with detroit lockers, that a logging fellow wants to buy, but does not need the dump body. So I was thinking I could put the dump frame and body on one of my M931 trucks. I don't want to go through the hassle of hooking up PTO to M931 and would just want to run a 24v Hydraulic...

M923a2 with cummins 8.3 I believe I have a bad injection pump. I'm kind of at the point where I don't know how else to test the culprit. Batteries are strong fuel shut off solenoid is working properly I've banged around on the protective control box. the engine will crank strong and I good...

I have a XM1061E1 T/A Flatbed Trailer that I won from GP. I was wondering if anyone here was picking up there and had room on a trailer or behind a truck that may be headed anywhere near NH. If I don't have any luck, I'll probably grab it with my pick-up truck next week. Thanks, Chris

I'm looking for one of you heavy hauling gentlemen that can pickup 2 m923a2 trucks at once in Newcastle Delaware and possibly deliver to kingston,NH for me. 360 miles one way. Please let me know what the cost would be if your able or if you have some shippers in the area you know or could...

Can two m931 truck tractors be loaded on 1 lowboy trailer for transport?

First off, I am using the flasher box rated for LED's so its not that. Grote 10-34V Military LED Taillights "Like New" MRAP Take Offs" I bough a pair of these from the classifieds section So I have got my fronts and rears hooked up and installed. Everything works fine when the 3 lever...

I would like to put power windows in my crew cab 5 ton and was wondering if anyone has tried this or has any ideas for conversion kits that would work with our style of windows and doors. I'm not doing this because I'm lazy or for the cool factor. I'm doing this because my children in the rear...

I was contemplating some type of power door locks with keyless entry when my crew cab 5 ton is done. I searched and could not find anything, so I was wonder if anyone has done this to a 5 ton style truck or has any ideas on how to go about it. I don't want to to manually lock 4 doors with a...

As the crew cab conversion on my m923a2 is moving faster than expected, I need to start thinking about seats. I don't mind keeping the 2 springer seats I have in the front, but I wouldn't mind something more comfortable with the 3 pt seat belt built into it. I definitely need something with...

Today I took the first substantial step in starting my 5 ton crew cab project. This fall I picked up a donor cab and I've spent a little time here and they're getting it rough-cut and everything pulled out ready to start this project. Today I removed the bed on my m923a2 and put it on the...

While scouting out a remote sand pit the property owner offered up for a shooting location. The unplowed road turned snowmobile trail turned mud bog with no where to turn around, Quickly became too much for my m923a2 when the font axle would not engage. I called A HMMWV that tried to pull me...

I looked through the TM's and can't seem to find part numbers for some of the transmission lines. I have one leaking and want to find a number so I can replace it. It comes out near the bottom towards the rear of the tranny then routes Over to the left side. no luck finding a parts list with...

I just got my invoice for 7/5/13 GL win of M923A2 in Newcastle, DE. I was looking for some help when the time comes for pickup. First I can't open my invoice with iPad and I'm at camp without a computer. The invoice webpage says must be picked up within ten day, is this after the EUC clears...

After searching several threads I don't think this particular problem has been covered. The brakes work fine I just have to keep an eye on the fluid levels. I have a slight leak after use, coming from the under the boot from the main shaft that attaches to the brake pedal under the body. I...

So one of the tires CTIS will not work and tire goes flat over night. I go to change out the tire and when I disconnected the the fitting on the hollow lug nut where air passes through, gear oil dumps out. Does anyone know off hand what causes this failure, I'm guessing its some seal on the...