Search results

I have 1 plate on my M105 that is bleached out/illegible and haven't been able to find a photo with one I can read. I'd probably like to replace it if I knew what I was looking for. The plate in question is highlighted and boxed in this crop I found. Can anybody tell me what it says and...

I've been sanding to determine the original numbers of my truck, but few have come out clearly and could be misinterpreted. Only clear stuff I've found are the '8' right behind the lower mirror mount on the passenger's side and 'ANGEL' stenciled to the rear on the driver's door. Not sure if...

Need Bolt Specs for Transmission Case Inspection Cover I'm missing the entire highlighted assembly (plate, gasket, bolts.) I'm trying to chase down all the replacement parts but would like to know the bolt specs so I can source quickly and fabricate a temporary cover. The TM page I found just...

Being in a metro area where the truck could be an attractive target for joyrides and mischief, I've been looking for a good theft deterant or combination. I settled on a combination. I haven't been impressed by the electric shutoffs I've seen because they seem ridiculously easy to beat and...

I jjust wanted to make sure this new unit is working so put a Fluke on the [unconnected] terminals and the unit gave several readings between 44 - 46v. The Solargizer is marked 24v. That seemed high unless the low amps offset it. I was expecting it to be something like an alternator at about...

A bit long but by way of introduction and thanks: On Memorial Day, I didn't know anything about this hobby, but answered an ad selling an M105 while looking for a utility trailer. Found SS via Google looking for how to make it work. Later learned from the site that it WAS too much for my E-350...

The lunette on my trailer is bent to the passenger side. After taking it apart, I discovered that not only the front vertical bar to the brake actuator is bent, but also the top transverse pin (see highlights on attached TM drawing.) I have doubts whether any of the bent parts can be...