Search results

after seeing oilcans 5ton flexin out at haspin .i had to get some pics of my truck all flexed out so here they are .this hill was about six ft. high i could see the hood flexing and the grill guard looked like it got hit by a mack truck :roll:everything popped right back .no deuces were harmed...

well i picked up my expandable this weekend .wow what a trip.i took my m35a2c and trailer i made to haul it to go get it.started out ok about 150miles into it the rear seal started dumping oil .i think i over filled it when i changed the oil.leak not a big deal till it started to make the clutch...

does anyone know the diameter or the fan on a deuce .i'm looking to free up as much hp as i can now since i think i have turned the fuel up as much as i can safely.:roll:so i'm gonna put a flex fan on there should be able to free up 20hp with that .and the new alt is alot less rotating weight to...

anyone know the weight of an expandable van body.also what are the inside demensions of an expandable van body when expanded.i'm looking to make a camper trailer out of one to pull behind my m35a2c:roll:i'm gonna use a house trailer frame i cut down with three axles.i'm leaving enough room in...

anyone interested in a m109 body i have one i will let go cheap its in decent shape no windows but i put plywood in the holes it would make a good secure storage or camper :roll:

ever since i got my truck its had syncro problems in 3rd .i just figured id wait till it crapped out totally . the last two days or so the trans was messing up big time .popping out of gear grinding going into gear and making noises.i figured i had killed the bearings in it the last big load i...

i need a dual voltage regulator from a hmmwv for my deuce does anyone have one they want to get rid of

i;m looking to get the things i would need to turn my m35a2c into a tractor does anyone have any of these parts or know where the best place is to get then near nw indiana the cheaper the better i could also use a measurement of how far the fifth wheel is mounted in front of the axle

i was hualing some gravel last weekend went to turn around when the ground gave way under the left side left rears were almost all the way under .tried to winch out backwards crunched the bumper . then i went to winch out over the fence to a tree broke the cable .could even dump the load...

does anyone have pics of the wiring diagrams for the dual voltage genarator used on fmtv i think im have voltage reg problems and i need the diagrams to properly test to see if its the gen or reg

my generator took a dump today i have a dual voltage one from a ftm on there i'm getting steady 24volt to the exciter wire when i first turn the power on it charges for about three sec then nothing does anyone know how the voltage reg on the gen works or where i can get one or where i can get a...

has anyone put a wheel lift on a deuce for towing cars .i,m gonna make one for my truck just wondering if antone had pics of one so i could get an idea of what ratio for the rams i,m gonna use to the length of the lift arm since i wont be able to make it as long since the axle sits back further...

i have the new style wesy coast mirrors on my truck i'm thinking about trading them out for the old style that have the arm coming from the windshield mount and a brace going to the door hinge .does anyone have them on thier trucki was wondering how visability is with them and do they shake alot...

anyone modded cummins 250 or lds which one has the most potential and do the mounts fit a deuce . or would a cummings from a dodge truck be a easier swap pics would be a big help