Search results

PLL = Prescribed Load List

possibly the switch is partially fried.

Plenty of people with problems with the switches. Mine almost burned up my M998. It was properly grounded and installed. The switch fries internally, and sometimes that has secondary effects of frying wiring connected to it. There are more than enough people that have had problems with...

Do yourself a favor, and replace it with a 3 lever... And no worries of the push button switch burning up the electrical system.... Do a search, you will see..

The pushbutton LED switches are nice until they short out and start an electrical fire, regardless of LED or incandescent bulbs.

Sounds like the place owned by Curtis Harvey

GMV's were "made" at Letterkenny.

Why do you want to change it?

Plug in everything while it is charging. Don't worry about the switch on the back of the gun.

You can have them, just not in a useable form.

I finally got a 330 gallon tote, used once, manufactured 3 months ago. Will work great for my inside extra storage tank. thanks for all the help!

Connect the battery to the unit. It charges via the 110V power adapter that's inside the case.

they are pretty bullet proof

DVE... I was in the first unit it the Army to get fielded the very first DVE's for testing... Fun times. The problem we had with DVE in the HEMTTS was the display was bolted the inside of the roof of the cab, and when going over bumps, between the seat itself going up and down, the truck...

I sell used Scepter MFC's for $45 + shipping.

Tractor HEMTTs are a rare breed. Not many of them made.

Much easier and cheaper to get 12V bulbs.

Use locktite on the half shaft bolts....

Never heard of using superglue... That might be the problem.

yes, easy to rebuild.