• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. N

    Dimensions/plans for Deuce engine dolly needed

    I have an opportunity to aquire an engine. Anyone have any suggestions on how to construct a home built cradle for use in the shop for test run/rebuild?
  2. N

    m37 headlight brightness problem

    A local guy came by my place yesterday with one bright and one dim front head light. I checked the ground on the dim light and it appeared to be ok. Upon presssing the floor mounted high/low switch the dim light got bright and the low light got bright. The problem moves from left to right when...
    • nickd
    • Thread
    • Replies: 4
    • Forum: M37
  3. N

    low sulphur content diesel fuel question

    diesel fuel in the state of Delaware will have lowered levels of sulfur in an attempt to reduce emissions. Will this change in the fuel have any damaging effects on the multi fuel engines? Are there any additives available to replace the sulfur?
  4. N

    air ride seat shock part# if you need one

    The part number is Gabriel of Canada #615116
  5. N

    deuce oil filter canister large gasket numbers

    Its time to change the oil and the gaskets that come with the filters are not the correct size. is there a NAPA number for the proper rubber gasket at the base of the canister and the hard fiber gasket that goes under the bolt on top?
  6. N

    M66 ring mount back rest pad needed

    anyone have one?
  7. N

    Who has the air assist steering on their deuce?

    anyone?
  8. N

    axle seal and wheel bearing numbers for reference

    I changed out the front axle boots today and here are some part numbers for the seal thats located behind the hub 50852CR also, the 2 small roller bearings on the top and bottom of the steering knuckle are Timken A-2047.
  9. N

    ramp length for deuce

    How long should the ramps be for loading the mule onto a deuce? I plan to make a set of ramps out of heavy aluminum channel.
  10. N

    MVPA national

    I was at the national show Friday afternoon and Saturday. Got a chance to see an LVT-4 owned by Tom Price in action swimming in the pond. What a sight to see! 30 tons of WWII history doing waht it was made to do. Got a chance to talk to Tom as he had a few other nice pieces on display, nice...
  11. N

    Split master cylinder brake set up?

    Has anyone considered installing a split master cylinder in the Deuce? Are the master cylinders available?
  12. N

    Who is going to the MVPA convention?

    I will be there (less the deuce) on Friday and Saturday. Are any other members going to be there? Should we try to meet up?
  13. N

    my deuce

    here is a picture of my truck on desply at a small MV gathering in South Jersey
  14. N

    some new pictures of the deuce

    had the camera out
  15. N

    use of wrecker ground spades?

    Wrecker guys, how often do you use your ground spades with the rear winch?
View older results
112,789members
166,306threads
2,342,308posts
745online users
Top