Search results

If you look around you can find some info on how to tweek the IP for more fuel. Really simple procedure. The 87 6.2 may be a good test mule. You can always put it back to where you started. I have a GEP 6.5 that I will mess with when I have time. You read all the time about how these engines...

If no one answers you drive down to your local tranny shop. They will know.

I used a CAT disconnect switch that a member posted about here. Installed it in the front of the battery box panel in the passenger footwell. I had already removed all of the slave jumper stuff and one of those cables worked perfectly. I switched the negative side.

Well since it came from a Blazer it may have had a 700 R4 tranny. If the TV cable bracket is still on the engine that's an easy $100. Sell the IP and anything else you won't use. You may come out with a spare engine for hardly anything.

For all you DIY guys Monster Transmission has a tech section that explains the TV cable function/adjustment very well.

When I get the correct bracket in I will compare them and post here what I find. I have heard, not seen, that the original Humvee bracket can be modified to work. From what I have read, the TV cable adjustment is a sort of do or die thing. It has to be right. I will do my own install when the...

Well I found the elusive TV cable bracket today. Got it thru Dirty Boyz in a roundabout way.

That's a different Alice.....

I gave up on balancing those 12 bolt wheels wheels. I stood right by the machine and watched the tech try to balance my set of 12 bolts. Tons of weight and it still wasn't right.Gave up. Modified a set of H2 wheels and mounted Firestone MT2's, Same tech, same machine and they took very little...

Glad the TV cable got brought up. I have a nice core that I will have someone rebuild, four speed shifter but no TV cable bracket! I have wanted ads out and not a bite. Where are these things????

Nice fender mods. Looks good.

If you have a Tractor Supply near you they have a nice fastener selection at a fair price.

Good job getting it going. I fool around with old tractors and know of many, many that are running after someone drained the water and got them free. Watch your fluids and cross your fingers.

The stick on pan heaters can be had at any of the places that sell tractor parts. Very common to use these on tractors. IF you find yourself with low batteries lets be honest. There ain't gonna be another Humvee that will pull up to help. Then you need the stupid expensive slave cable. So the...

Thanks. Just finished getting the winch and bumper off. That was a job. It has a Dana 70 front axle with a 60 rear. 4.10 according to the diff tag.

New project...1972 Dodge Crew Cab This was advertised as military but I can't find anything on it to verify that. The faded green paint may be OD but the truck was originally painted white. I am going to clean it some today but it looks like it has Dana 60's front and rear. The front bumper and...

I always did like roof racks on trucks. I personally don't have a use for them but they sure do look good. Good job.

Don't go using my junk as any kind of standard! I'm anything but standard.

That baby’s up there. I had to go measure mine. I’m at 19 inches measured at the point between the front and rear door.

Disconnect the pump from wherever it's mounted, connect a hose to the suction and run a hose down thru the filler spout, temporary power and should be good to go.