Search results

FEMTT - Center stage at AMVCC Show Soni, here are a few photos of the FEMTT at the AMVCC show. Your vehicle and your talent to create such a versatile vehicle is very impressive. Even after looking at this vehicle for two days, I wish I had more time to look at the FEMTT.

Nice score. One of these days I will buy one :)

Show Photos A few photos from the show next to Soni's FEMTT.

AMVCC 2016 Show Here is a short video I put together when I walked through before the crowd on Sunday morning. https://www.youtube.com/watch?v=9Lmz0kz3I-4 I will also upload separate photos to a shared folder on google drive to share any photos that you may want of your vehicle.

If you are coming through Phoenix and have time to stop, let us know. There are a few of us that would like to check out your HEMTT.

Side profile view only had a chance to work on small items this weekend and start to prepare the back frame section for paint. When they refurbished the truck they put undercoating on the outside frame rails. The undercoating was had spider web cracks all over, and is not easy to remove. Moved...

Was able to get some paint work done this weekend, as the next week it is supposed to rain all week. It was a very enjoyable 73 degrees outside which made it nice painting weather. Still need to work on the back part of the vehicle to get it ready for paint. Starting to prioritize my list of...

Hope your trip goes well. Great photo of the truck on Facebook.

Looks great. Thought about doing the same thing in the past before my recent project.

Patracy what did you finally end up doing with your fuel switching valve? I know you where going to look for a electric one. Did you find one that will do both the fuel and the vent line? Also where did you relocate this too on your SEMTT?

the MSFETT starts, moves and steers :) Made a little progress over the weekend. The biggest thing was being able to start it up, move it forward and back and steer it. After two minutes of running the trans cooler line had a pin hole leak. I was able to make it before closing to the hydraulic...

Excellent fabrication of the new muffler and heat shield.

This is a great looking truck. Was nice to meet you in person and see the excellent workmanship on the Scorpion plates, BBQs that you are making to sell.

Congratulations on the purchase and welcome to the site.

Very well put Marchplumber (Tony). The little wheels are my training wheels for the new girl :) Actually those are for my small trailer that I use as a workbench, and storage of extra metal while I work on the project. I keep making a "To Do list" and always end up adding more little things to...

You can loan a clutch alignment tool from Autozone, or O'Rielly Autoparts. They usually just charge a refundable deposit.Once the clutch disc is centered and the angle is right of the transmission, it should go right in.

12-20 work completed Even though I worked on it most of the weekend, it seems like there was not as much progress as I thought I would get done. Made brackets for the accessory tool box in the back, and bolted the one up the one on the side. Worked on many miscellaneous items. Only 5 weeks left...

Have you guys tried a 3rd party titling company. They take less time to stand in line and sometimes have better idea's on the way they can get these done, or at least help you work through the issues they identify.

Excellent install and selection of mounting areas to avoid the lights being knocked off.

Artisan, I found your thread on the hitch install. it is at http://www.steelsoldiers.com/showthread.php?130112-Hitch-Fabrication/page2 and post #18 I used the search "Artisan trailer hitch" Nice install Artisan :)