Search results

I posted earlier about doing the cooling system flush on this truck and also took all tires off to take to Mark (100dollarman) for a trade out.As usual doing business with Hundy was a pleasure.Well I thought I should post a few pics with them on.Was a chore to do the R&R but tollerable.They ride...

Got a chance this weekend to kill a few rats on the 813,not literaly but project wise.Started by flushing the cooling system.The trucks got about 4000 mi. on it since depot rebuild and the antifreeze did'nt look all that great. I removed the bottom petcock valve from the rad. and let it...

I recently installed a new low air pressure switch on the 813A1,now the thing burps when you shut down.I can feel the air escaping out the side of the switch.Can i fix the thing or do I need to try and track down another?Thanks!

813A1 radiator flush,please advise! Decided to drain and flush the cooling system on the M813A1 w/ cummins.The initial flush was the expected brown wore out antifreeze.With the drain cock removed at the bottom of the rad. and the top rad. hose off I have been running water through it,then...

Looking for a pic or two of an 813 on 11.00-20 Michelin XL's dueled config.Thanks!

Got a spin-on conversion for the 813A1 and would like to know what the general concensus is for which filter to use. I got a Baldwin with the kit but the folks at NAPA are recomending thier XD series.:confused: Thanks!

Does anyone have or know where to get the "cold start procedure" plate as well as the two plates that are to the left of the steering wheel positioned around the start switch and fuel pressure gauge on the m813A1 5 ton w/cummins? Thanks!

Does anyone here have a new or good used 250 Cummins rubber air cleaner intake elbow? Or know of a civvy one that will work the same? Mines all hard and brittle. I dont think it will survive a removal.

What would the numerical designation on a bridge plate be for an M813A1?

Has anyone here replaced that gasket in-place? Is it a real pain and also can I use a gasket sealant with it? I've got two different types of gaskets.One is a standard paper type,the other is a hardened kind of gasket. Which would be better? Thanks!

I put a set of humvee tires and wheels on my M101 trailer and they seem to be a bit to set back.They dont rub but are close and the e-brake cables barely clear.I would like to know what size spacers would work.I'm looking at the 1 1/2" spacers but like to see if anyone else has experienced...

Anyone got a number for the little filter that goes in the top of the fuel pump on the 250 Cummins.This is in an M813A1.Thanks!

Where's a good place to get a gallon of this?

Anyone know where I can get a new low air pressure switch, the one that tells the buzzer when to stop buzzing.My buzzer wont quit so I figure its got to be the switch. :?: Thanks!

Any tips on taking on this chore? Provided all goes well about how long does it take,I have all the parts on hand. Thanks

Anyone heard of 24 bolt wheels for the humvee?

Has anyone had any experience with these 3/4 impact wrenches? I picked one up recently but it appears to be needing parts.The gears inside the nose that turn the anvil are trashed.Wondering if its worth trying to repair it or not.

Was wondering if anyone has put Humvee wheels on an 06 or newer Dodge truck.The recipient would be an 06 1 ton 4x4. Any thoughts? Thanks!

Whats the best all around TM for maint. for the 809 series w/ the 250 cummins?

Where can I get a set of radiator hoses for my 813A1 with the 250 Cummins? Also a new air filter intake tube.The big one from the air filter. I've tried the usual suspects but either WAY ! to expensive or no got. Thanks!